...The symptom you describe does ring a bell......Are you saying that this motor forgets where 0 is everytime you power it off?
Then surely, it does not support proper DiSEqC and USALS!
Yes.
I observe it when trying to fine tune a position in the motor (I use the DreamBox800 by
the tuner output that I connect to the spectrum analyzer, in the VU + DUO2 I only have inputs, have dual tuner), change equipment and lost the position, 2 receivers had the
same latitude and longitude data.
The trick is to zero the engine, disconnect and connect the power supply, already has the zero reference, then send the satellite you want.
It works well in DiSEqC 1.3 / Usals,
the problem is its way of working.
In the old engines, gradually lose the reference of position 0, touch to zero and climb where you have the motor (roof) and press the rest, working well.
With this engine, you do not have to climb to the roof and carry out the process.
Some are delighted with the solution (less problems with the neighbors), for the lunatics of the satelite like us, is a "shit".
I bought it a few years ago as a
Rover white brand (35 €), in the documentation and in the box
supports DiSEqC 1.2 (logo in large) and in features, indicates that it supports GotoX.
Conclusion, you are not certified for DiSEqC 1.3/Usals (that's why it's very cheap).
PS: Question to adapt,
I removed it and put another SG2100A.
-------
Asi es, si.
Lo observe cuando al intentar afinar una posicion en el motor (uso la DreamBox800
por la salida del tuner que conecto al analizador de espectro, en el VU+DUO2 solo tengo entradas, tiene tuner dobles), cambie el equipo y perdi la posicion, los 2 receptores tenian los
mismos datos de latitud y longitud.
El truco es mandar a cero el motor, desconectar y conectar la alimentacion, ya tiene la referencia del cero, entonces mandar al satelite que quieras.
Funciona bien en DiSEqC 1.3/Usals,
el problema es su forma de funcionamiento.
En los viejos motores, poco a poco pierden la referencia de la posicion 0, toca mandar a cero y subir donde tengas el motor (tejado) y pulsar el rest, funcionando bien.
Con este motor, no tienes que subir al tejado y realizar el proceso.
Unos estan encantados con la solucion (menos problemas con los vecinos), para los locos del satelite como nosotros, es una "mierda".
Lo compre hace unos años como
marca blanca de Rover (35€), en la documentacion y en la caja
soporta DiSEqC 1.2 (logo en grande) y en caracteristicas, indica que soporta GotoX.
Conclusion, no estas certificado para DiSEqC 1.3/Usals (por eso es muy barato).
PD: Cuestion de adaptarse,
yo lo quite y puse otro SG2100A.