Arabsat 26

Thanks bro , I will call my Dish pointer and if he ask me anytyhing I will ask you here

plz bro try to keep your eyes on this Topic incase I have Questions for u :)

and if all this work for me , I need to send you special gift to Greece bro :) I mean it
 
u think mate after one or two days all the channel names will come into this link ???
 
Yeap ...
 
Thank you lots adonis1 :)

I asked you already 100 Questions mate and thanks for your time Really

I will wait few days and then see what the Dish pointer ask me and then I might ask u somethihg else about Chinasat12@87.5E you said its Ku band , Right !

and if the man ask me more things I will back to you here so plz keep look here bro for next few days if that ok for you
 
but if I write all those Freq u gave me into Chinasat 12 @ 87.5E I will get all IRIB Channels , Correct mate ?
 
and for sure all Chinasat 12 @ 87.5° East IRIB Channels HD mate , Right ? so need to use HD Reciever , Correct ?
 
With your new dish , you will get both sats , ST2 @88E and Chinasat 12 @ 87.5E , they are very close each other .
 
Adonis is in Greece - west of you Jeries. If he can get them you should be able to.

Almost any old dish you have spare lying around should be good for this one.

No-one can answer the question about how long these channels will remain, again they could stay on Chinasat for years or disappear next week.
 
Yes Analoguesat I know what you mean about nobodey can secure when Channels will leave the satellite but its abit unfair man to spend good money and time and then all go away .....

I hope my Dish man dont make this now big story and can do the work normal
 
With a 60/80cm dish you could probably set this up yourself quite easily, especially if you have a small portable tv you could take outside and rig up next to the dish.

As long as you have completely safe access to the dish - never put yourself in any kind of danger when tinkering with dishes!

Thats how Ive set all my dishes up over the years :)
 
hehehehe beside Im really stupied with this things , where I live is abit hard to do this alone

Ohhh mate I Just saw u from scotland , the place I dream always to spend the rest of my life , I have been in Aberdeen many years ago

u are lucky to have country like scotland I must say !
 
No you arent stupid with these things - you have learned a lot in the last couple of weeks :)

And it really is quite easy to set up a small dish with high power signals as long as you can see a screen of some sort - you tune the box into a desired frequency, aim the dish in approximately the right direction then slowly move it around backwards & forwards until you find a signal.

Scan the signal to make sure you have aligned onto the right satellite (I guarantee everyone on this forum has aligned a dish onto the wrong sat at some point! :D ) If you have the right channels tweak the dish & lnb up, & tighten all the bolts up.

Just remember - we were all beginners at the hobby at some point - some of us have been slinging dishes up (some more rickety than others) for 10-15 years :)
 
still hard for me mate , Im very good doing my normal work sure :) but this stuff Im no chance erally , so I leave it for thier people :)

anyway I still waiting as adonis1 adviced me untill all Channels Freq come to http://www.flysat.com/chinasat12.php

and then I will call the Dish man to come and start work .

I cant wait untill I see all the IRIB Channels here in my Office !
 
Back
Top