astra 19.2 e

C

comber

Member
My Satellite Setup
1 metre motorised dish
fortect innovation hd system
My Location
nothern ireland
could someone please let me know how many channels i should be getting im not getting any of the german and french channels
only getting 350 channels thankl you
]fortectstar
1 metre motorised
:confused:
 
Name a few channels you are getting - theres a good chance you are aligned onto the wrong satellite
 
_http://www.flysat.com/astra19.php

I'm sure your counting ability is the match of anyone elses :)

Assuming you are on the correct Satellite (Analoguesat has already queried this!):

Can you list a few specific desired Channels you aren't getting: That way we can see if you are missing one Polarity or one Band (due to faulty LNB or incorrect LNB setting in the Receiver) or possibly if you have a Skew problem (very likely if you are using a Fortec Star LNB).

Is this a new system or is it an old system that previously worked?

Not enough info so far ..................
 
Analoguesat said:
Name a few channels you are getting - theres a good chance you are aligned onto the wrong satellite
Click to expand...

channel 4
film 4
bbc channelsitv
disney
sky horror
mtv
vhi
etc
 
comber said:
channel 4
film 4
bbc channelsitv
disney
sky horror
mtv
vhi
etc
Click to expand...



Your on Astra2 @ 28°e.

For Astra1 you need to move the dish 9° in a Westerly direction.
 
satelliteman said:
Your on Astra2 @ 28°e.

For Astra1 you need to move the dish 9° in a Westerly direction.
Click to expand...

just got this system what transponder should i start with please
all so confusing
 
comber said:
just got this system what transponder should i start with please
all so confusing
Click to expand...

Have you set up this motorised system or was it installed for you?

If it is correctly installed (by whoever!), then just find Astra 1 in your Satellite list.

The motor should drive the Dish to 19.2E and then all you need do is Scan.

(Still not enough info .............)
 
Tivù said:
Have you set up this motorised system or was it installed for you?

If it is correctly installed (by whoever!), then just find Astra 1 in your Satellite list.

The motor should drive the Dish to 19.2E and then all you need do is Scan.

(Still not enough info .............)
Click to expand...

it was installed for me
had it all pretuned ,but i done a factory by mistake so am trying to
get all the satellites back ,got 5 back so far now
astra got them now do you no where iacan get thr right transponders codes please...
 
comber said:
it was installed for me
had it all pretuned ,but i done a factory by mistake so am trying to
get all the satellites back ,got 5 back so far now
astra got them now do you no where iacan get thr right transponders codes please...
Click to expand...

Well done on making progress!

Look at Post #3 : I posted a link to a listing there.

Mind you, it would be much easier if you did an Auto/Blind Scan if the Receiver permits. Saves a lot of manual data entry.
 
Tivù said:
Well done on making progress!

Look at Post #3 : I posted a link to a listing there.

Mind you, it would be much easier if you did an Auto/Blind Scan if the Receiver permits. Saves a lot of manual data entry.
Click to expand...

i bought a mp02 positioner save a bit of time am using flysat but but some of them transponders dont seem to work ,
 
comber said:
i bought a mp02 positioner save a bit of time am using flysat but but some of them transponders dont seem to work ,
Click to expand...

They should be - that's the point. However, don't forget kingofsat.net or lyngsat also carry them.

If they aren't working, perhaps your factory reset ( :-ohcrap) has affected your LNB settings? "Universal" required.
 
I have SilverCrest SL 65 receiver set on Astra 1B 19.2E.
It used to get the Vox channel,RTL etc but now no signal. It is mainly German channels that i'm after. Advice please.
 
I done a scan on 19e yesterday with a 1m in Dublin and picked up I think just over 1,500 services in total just to give you an idea.
 
Back
Top