AV-comm constructions

Please explain what an "adjustable construction" is. Do you mean an LNB changer or something else?
 
Hallo ozumo,

No not a: LNB Changer.
But to run the C-band LNB with a servo engine.
And to let the AV-Commun shift due to; The depth in the scaling.
 
@MrDish1 can you provide some pictures of equipment, such as AV-com and antenna you are going to marry? Or that was only a theoretical question?
 
That AV-com is from Wim (Trust) ,and the dish is the 1.84 from Chappie (Chaparral)
 
I still do not understand where is the problem.... Just take your Av-Com and install it on your dish. Just make sure the phase center of the LNB (Av-Com) is co-located with the antenna's focal point. Very simple.
 
So, where is the problem? Can you show it?
 
Want to make it so that I can fine-tune the dish in the hobby room downstairs.
I already have qwer and dreamsat as an example of what they have made.
 
Aw, I see, question is solved and thread can be closed. Even though we miss some real pictures :cool:
 
please

AV Comm motorized

I only have a 2.20m antenna for the C-band. With this, most C-band transponders can only be received very closely. So I made the LNB rotatable to receive all polarities and it can be moved in the waveguide of the AV-KOMM. With this technology I get up to 2.5 dB more signal on bad transponders...
www.satellites.co.uk www.satellites.co.uk
 
That`s rotate the lnb is clear.
but does is go Up and down in the scalaring that AV-Com.
that is wot i olso wonne now.
Thank you channel hopper.
 
Back
Top