Much sympathy - something like that has happened to me/us several times over the yearsWell I'm saving myself £10 a day, my heating has packed up and they can't send an engineer out.
He said the big Honeywell valves have packed up, but I tested them and they work fine!
Sat here with 10 jumpers on and an oil filled radiator.
Well I'm saving myself £10 a day, my heating has packed up and they can't send an engineer out.
He said the big Honeywell valves have packed up, but I tested them and they work fine!
Sat here with 10 jumpers on and an oil filled radiator.
The motorised part of the valves work perfectly and so does the mechanical part of them. I think it was an excuse to say I can't be bothered I'll send an electrician out.Much sympathy - something like that has happened to me/us several times over the years
That's why we still have a "backup" gas fire in the lounge (which has been on low heat for the last 48hrs in addition to the c/h - first time this, and possibly last, Winter!), a gas hob in the kitchen and several fan heaters (in the attic) - all of which can provide some "local" warmth if needed. "Diversity" and lots of insulation do help.
Edited: just remembered that there's also the bottled-butane space heater in the garage - old, battered, ugly, but it still works very well!
PS: have you tried giving the "big Honeywell valves" (which I assume are those which control the h/w from the centralised heating supply ?) a few "careful taps" with a hammer as they can sometimes move but no water comes through because of a local blockage in the lockshield ends of the valves?
I ran into that problem at home several times - and then on the houseboat on the Thames in which a nephew & then g/f were living and the bedroom at the bow was freezing although the rest of the system seemed to be OK (and you seem to be at the end of the block, and thus in a somewhat similar situation). So, I borrowed his small hammer and tapped firmly away at the body of the valve for quite a few minutes until the entry valve loosened a bit, and then hot water came through - he always remembers that, and sometimes has asked me to "fix" a c/h problem in other places he has stayed, but I politely "declined"!

Saw on FB that there are hundreds of callouts again for combi-boilers not working because the condensation flow outlet is frozen solid , hence blocked which the boilers sense so refuse to fire up
They are not degree subjects that's whyYou'd think people learned from the 2009/10 Condensate Pipe Plague fiasco to insulate their pipes...
oh, sorry, I forgot we're in Britain, logic and common sense is not common any more........![]()
Keeping warm by baking...View attachment 115081View attachment 115084
The condensate issue was highlighted on The One Show tonight - so that's probably where the FB poster got it from - and that also told people how to fix it (a kettle of hot water in most cases), or even avoid it happening (insulate the external parts of the condensate vent pipe!).You'd think people learned from the 2009/10 Condensate Pipe Plague fiasco to insulate their pipes...Ah, sorry, I forgot we're in Britain, logic and common sense is not common any more........
![]()
A couple of logs on the fire would make more sense than making,/burning cake.