C band Lnb advice
- Thread starter 4Himdj
- Start date
A
Anonymous_1
Guest
Theses LNBs works well on small antenna up to 1.20m, less interesting for 1.80m,
I have one unit here, received few years ago,
No scalar ring necessary
works for circular and Linear signals.
Details of mine (various available, C, KU, Combo C/KU, etc)
I have one unit here, received few years ago,
No scalar ring necessary
works for circular and Linear signals.
Details of mine (various available, C, KU, Combo C/KU, etc)
Costactc
Regular Member
- My Satellite Setup
- 3m channel master mesh-24" vonweise actuator-ps1 x2 lnbf(L)-pansat ap3500 positioner-x2 premium III-vu+solo2.
2.4m fortec solid-24" vonweise actuator-esx 241 lnbf(c)-vbox 7 positioner- dm800.
1.2m fortec-24"sj actuator-invacom snh-031--tm 5402 m3.
- My Location
- Canada
I am using 2 no name brand gsky lnbf on both my c band dishes. I'd send you a link but I can't seem to locate it atm.
nelson_b
Contributor
- My Satellite Setup
- Strong 4375 driving a 2.4 m Channel Master dual focus offset + Invcom Quad C120 K/U l.n.b. + BSC 421 and Zinwell C band l.n.b.,s - DR HD F15 - TM5302 - Octagon SX88+Optima - GT Media V7 - HD receivers. + other dishes currently in use - Antique 3.0 m Prodelin P.F. - Channel Master 1.8 m offset - Channel Master. 1.2 m.
- My Location
- North West Yorkshire - near Lancashire & Cumbria borders.
Yes i have good results with an ESX 241 ..... and also with BSC 421 (maybe obsolete now i think)
On my Channel master 1.8 offset dish i have both of those l.n.b,s
BSC 421 for circular signals ... and the ESX 241 for linear signals ...
this arrangement works well on this dish ....
On other larger dishes iv used them on the BSC 421 has been best..... both performed better in general than the Titanium c1 pll..
on a smaller dish 1.2 channel master offset ... i could see no real difference between the three of them to be honest ....
