CAM upgrade (not for free-viewing)

T

tesla

Regular Member
My Satellite Setup
?
My Location
Lost in the night
Hello guys,
i have a cryptoworks CAM that should be upgraded. I'm not interested in free-viewing, hacking, cracking etc.

I just need to upload to CAM the new version of the software. Any ideas?
 
get yourself a cas3 programmer
 
I've got a Duolabs programmer. How can i find the software of the cam?
 
There is no useful upgrade to a cryptoworks CAM that I am aware of.

You might get a better response if you say:

1/ what version cryptoworks CAM you have
2/ what version you want to upgrade it to
3/ what information are you using to make you think that an upgrade will help you
 
I have cryptoworks CAM, version 1,0. I received a new s/c. It didn't work with the 1,0 CAMs. I borrowed CAMs with version 1,2 and the s/c works.

That's why i'm interested in upgrading my 1,0 CAMs.
 
Your version numbers do not match published data on this cam, you might be confusing version number with revision number. Have a look at lefdata for the full information.

I think the probable answer is that your cams cannot be updated in any PCMCIA device. Without the full & correct identification of both cams (yours and your friend's) it is not possible to give a definitive answer.
 
CAMs that are working: P/N 901632, Rev. 1.2

CAMs that are not working: P/N 904221, Rev. 1.0
 
Back
Top