Cannot FTP to my 500 with DCC STRANGE!!!!

On the image I have, under Blue Panel -> Extras / Setup. There is an option to create a backup. I'm not sure if the backup will include your CCcam.cfg file or not.

It being a DM500 with no local storage, you'll need to save the backup to a network drive / mount.

If you know the contents of CCcam.cfg, there is no need to run the back up at all. Just flash with a new image and load the settings from your DM600 to your DM500 using DreamboxEdit. That way you wont lose your favourites lists.

Then install CCcam and add the appropriate lines to the CCcam.cfg file.
 
thks compufunk will try to do so tomorrow
will keep you updated with the outcome i hope everything will work smoothly

good night and thks for everything
rgds
cesco
 
cesco said:
thks compufunk will try to do so tomorrow
will keep you updated with the outcome i hope everything will work smoothly

good night and thks for everything
rgds
cesco
Click to expand...

Good morning cesco,
If you do the reflash, I would recommend to test if you can FTP to 500S with just the minimum setup with just the channel list. That is without any CCcam or plugins.
This way you will know it is doing FTP OK and then at another stage you might get a blockage. Hopefully not.
If your receiver is a clone, then you shouldn't use Gemini.
 
HB13DISH said:
Good morning cesco,
If you do the reflash, I would recommend to test if you can FTP to 500S with just the minimum setup with just the channel list. That is without any CCcam or plugins.
This way you will know it is doing FTP OK and then at another stage you might get a blockage. Hopefully not.
If your receiver is a clone, then you shouldn't use Gemini.
Click to expand...


guys good morning, you know what?!!
i cannot do a backup with flash pro as when the software try to log in it will be stopped by the box!!!
oh what a hassle!!!:(
if i will leave everything as it is can how can i install the vlc 1.3 in it
it is not on the gemini server
when you go to add ons there is another server which is titled your server, what is that one, can i set it to my pc's ip or i am talking nonsense!!
thks again
rgds
cesco
 
cesco said:
guys good morning, you know what?!!
i cannot do a backup with flash pro as when the software try to log in it will be stopped by the box!!!
oh what a hassle!!!:(
if i will leave everything as it is can how can i install the vlc 1.3 in it
it is not on the gemini server
when you go to add ons there is another server which is titled your server, what is that one, can i set it to my pc's ip or i am talking nonsense!!
thks again
rgds
cesco
Click to expand...


the flash pro is telling me this when i try to do back up of the 4.0 image: 500 oops chdir
 
View attachment 22614
cesco said:
the flash pro is telling me this when i try to do back up of the 4.0 image: 500 oops chdir
Click to expand...


guys i noticed that when i go in tuxcommander/passwd there are only 5 lines and when i go in the 600 tuxcommander/passwd there are much more lines then 5??!!

i attached a screenshot of the passwd pls look into it as it is saying ftp false

thks
 

Attachments

  • screenshot.webp
    screenshot.webp
    30.2 KB · Views: 75
and this is what i am getting when i try to log in with dcc without password (as i canceled the passwd from tuxcom


**************************
* *
* The Gemini Project *
* *
**************************

welcome on your dreambox! - Kernel 2.6.9 (12:07:44).

dreambox login:
root
warning: cannot change to home directory

BusyBox v1.01 (2007.08.23-20:51+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@dreambox:/>
clear
root@dreambox:/>
clear
root@dreambox:/>
r
o
o
t
 
 
 
 

what do you think guys?
thks again
cesco
 
@ compofunk

hi compufunk, can i ask you one last question re my problem pls?
when you do a back up os an image will it save everything? for ex. the cam settings (specially if you are sh...!)
if i do a back up from my 600 and i flash my 500 and install the same image (gemini 4.0) as the 600 back up on it (500) will it work?
thks
cesco
 
Sorry, I forgot about this thread. :-DOH2
cesco said:
when you do a back up os an image will it save everything? for ex. the cam settings (specially if you are sh...!)
Click to expand...
I've never checked that so cant be sure. You'll just have to check the backup file before flashing the DM500.

Also, as mentioned earlier. You could open up CCcam.cfg in TuxCommander and note down the settings before flashing.

cesco said:
if i do a back up from my 600 and i flash my 500 and install the same image (gemini 4.0) as the 600 back up on it (500) will it work?
thks
cesco
Click to expand...
I wouldn't even attempt that (If I understand what your saying correctly), you're likely to have a very messy image on your hands even if it did work.

Just use dreambox edit to load the channel settings from your DM600 to the DM500 after flashing.
 
I didnt want to hijack the other thread, so I'll respond here.

The backup method described here...http://www.satellites.co.uk/satellite/dreambox500/153588-question-about-dreambox-backup.html
is not suitable in your case. This backs up the whole image (everything in flash memory), meaning that if its restored, the restored image will be a Gemini image in your case and you'll still be stuck with a password you dont know.

Also, the resulting backup file is not easily read. So it will be hard to read/restore your config file(s).
 
hi compufunk


so if i will flash the 500
copy the mg.cfg and newcam.list from my 6oo (as they are both using c... sh... from the same owner)
install a new image on 500 (for ex. nabilo)
then i copy the mg.cfg and newcamd.list on the new image i think this should work waht do you think pls?
thks
cesco
 
Yes that will be fine. Just make 100% sure that you are in fact running MGcamd on your box.

To make sure. Press the blue button on your remote and post a screen grab here.

If it says Auto-Camd setup as in the attached image. Press OK then take another screen grab. View attachment 22667

You'll just have to install MGcamd from the plugins menu on the Nabilo image, then set it as your default emulator.
 

Attachments

  • osdshot.webp
    osdshot.webp
    20 KB · Views: 34
no i am not 100% sure that it is on mg camd because on cam its named as iwatch but when i go to addons,delete i find only mg camd installed as a cam, so i thought that they are using ,g camd but they named it i-watch, can it be??
View attachment 22668

thks
cesco
 

Attachments

  • screenshot.webp
    screenshot.webp
    24.8 KB · Views: 37
I have to admit that I have not come across iWatch before. A quick google of iWatch along with some satellite terms turns up nothing. :confused:

The person who set the thing up may have renamed the cam in use to try to throw you off the cent. If so its going to be a case of going through the config files and trying to find one that has some info you can go on.

You could also check the log files in /tmp to see if there are any clues there.

Checking the default web info ports will probably be of little use here.

It may be something to do with this _http://iwatch.sourceforge.net/index.html, but I doubt it.

What package are you receiving through card sharing? Is it Belgian by any chance?
 
i went in tmp and the only config files i found are named mgcamd so i think that we are using mgcamd but with another name!!
these are the files i found on tmp

camd.socket
db
ecm.info
gdaemon.socket
hotplug.socket
mgcamd.pid
mgshare.info
mgstat.info
mmi.socket
pid.info
pmt.tmp

thks again
cesco
 
Yes it looks like MGcammd is being used.

Have you had a look at the contents of ../keys/mg_cf?

If so, what in it? (remember to disguise any URLs and passwords etc before posting)
 
screenshot 2.webp[/ATTACH]

hi compufunk
i attached a copy of the keys folder but the problem is that when i go in the mg_cfg from the tuxcomander it's empty.
i think when you go in from tux it will not let you see the scrip or what you call it info!!
you have to go in from ftp to see the info but if you remember well my 500 won't let me log in, even if i changed the passwd for thousand times now!!!:(
with the 600 i can go in from ftp and see everything but i don't think that i am using same servers as the 600 doesn't flikker at all the picture but the 500 yes!!
what do you think?
i was thinking to flash everything and after i install the new image on the 500, i download the mg camd like you said then i copy the mg_cfg folder i have on the 600 to the 500 am i correct ?

thks again
rgds
cesco
 

Attachments

  • screenshot 1.webp
    screenshot 1.webp
    53 KB · Views: 31
cesco said:
i was thinking to flash everything and after i install the new image on the 500, i download the mg camd like you said then i copy the mg_cfg folder i have on the 600 to the 500 am i correct ?
Click to expand...
I dont think that would be a good idea. You'd end up using the same credentials to connect to 1 server. I dont know if this is a problem with MGcamd but it doesn't work well in CCcam.

If you are paying for the share on the DM500 and experiencing flickering, I would dump them and give no more money.

Why not ask whoever set the thing up to give you the details you need for FTP etc?

Sorry cesco, but I've run out of ideas on this one. Its hard to tell you what to do when I dont have access to the box.

Good Luck.
 
COMPUFUNK I DID IT!!!!!!!!
so i did reset to factory default on my 500
then i set all communication setup and everything from scratch
installed mgcamd from scratch
tried ftp from pc it worked immediately!!!!!
i copied my mg.cfg files and newcam.list from my 600 to my 500
and everything is working smoothly:):):)
shall i leave it with gemini 4.0 or shall i put nabilo darksat II as i heard it's better for 500 clones?

thks mate
rgds
cesco
 
Back
Top