conax prob!!!!!!!!!!!

guinness

guinness

Regular Member
hello!!got problems regarding the on and off of the conax channels with titanium!!
spec!! -Samsung 9500
-MR 1.08
-Blue Tit Card, OS1.06
if i downgrade the titanium to 1.03 the samsung does not clear!with 1.06 it clear the channels,but after about 20minut they go off and need to switch off the reciver and back on!how resolve the problem??thanx
 
It may be more to do with the MR than the Titanium Guinness, they can be a bit twitchy on some receivers.
 
Guinness

I'm having the same problem but with a Magicam so I don't agree that its your CAM.

I'm using 1.06 with my Tit card but am reluctant to downgrade to 1.03 as I'm reading mixed reports on various Forums.

Up until a few weeks ago I was using my MM with Penta software and I wasn't having these problems of 'locking' so it must be down to the Tit card. What I'd really like is to get the update of the Penta. I've requested this on this forum but haven't had a useful reply yet.

Good luck

Tommo
 
I have been having the same problem but channels cut out sometimes afer 20 seconds. I'm using a season interface with licardemu. Any ideas?

J
 
I have a Conax Cam Version 4.00, Digiquest P1 (a rebadged Humax F1-C1) and windows 95. LCE has always worked fine in the past. I have been trying WCE(version 1.10) from Laurals.com but it doesn't seem to work. When I reset my receiver I get:

end of reset
ATR: 3b 9f 21Bytes didn't match21 - fe
-error Statusd=2(!=20)

Any ideas?

Joachim
 
Success. Got WCE working by changing the Conax Baud settings in the WCE file to 8861 to work with my Version 4.00 Conax Cam. No dropping out of picture either.

Thanks,

Joachim

Season interface, Digiquest P1, Win 98, 150Mhz, WCE 1.10, 80cm dish (London).
 
WCE 1.11 is also available now:

New stuff:

1. Seca2 provider 0067 (D+ taquila PPV ?) mod and exp tables added.
Thanks to mrdude for the interim patched WCE version :)

2. Viacess version 2 (NTV+, 16 byte 'key') support added.
viacess 1/2 stuff reworked in Conax, via, irdeto and seca mode..
could well be broken completely) 8-)
 
I use a blue tit with OS 103 and it works fine, but if I upgrade to OS 106 my TV goes blank.

It seems that the tit cards like to kept in 103 mode, and if you go to 106 your setup needs to be rock solid...ie...cam , card , and receiver all working well together.
 
You should find it at Satdudez.
 
Don't download 1.11, some new functions introduced some new major bugs.
Release 1.12 already out which fix all these bugs.
 
rolfw said:
You should find it at Satdudez.
Click to expand...
Whenever I stroll over there, the registration is always disabled. Is there a funny handshake or registration restricted to a particular day? Cheers! :)
 
Dudez is not open for new members just now, this might change soon. Keep your ear to the ground and wait for the doors to open again.
 
marcoh64 said:
Can be found also at sat-key
Click to expand...
rolfw
I'm waiting for an email confirmation back from Tony Doe's for future use, thanks!

marcoh64
Thanks for the link - something for the weekend!
 
Back
Top