OldBen
Mad Scientist
- Joined
- Jul 29, 2005
- Messages
- 249
- Reaction score
- 4
- Points
- 18
- Age
- 47
- My Satellite Setup
- Triax TD110 with multi LNB 28.5E, 23.5E, 19E, 13E Inverto Black Ultra's (Black Premium on 28.5) into multiswitch. VU+ Duo. Emitor Satlook Lite meter.(Retired: Technomate 1500CI+, Moteck DG2100 DisEqC Motor, Metronic 85cm Clear Dish, Invacom 0.3db LNB
- My Location
- UK
So I have a Moteck 2100 with a 85cm clear dish on it, that is slightly out of alignment. Either that or the technomate is confused, I suppose either is possible, but due to dish location and recent winds I am assuming its the dish.
Here is the thing, I can get 28.2, 19E fine with USAL/Diseqc positioning but if I crank it round to 1w or beyond its all slightly off, I have to nudge it back with the technomate manual adjustment (like its gone too far) then I get a strong signal again.
Current theory's:
Thanks for any help...
Here is the thing, I can get 28.2, 19E fine with USAL/Diseqc positioning but if I crank it round to 1w or beyond its all slightly off, I have to nudge it back with the technomate manual adjustment (like its gone too far) then I get a strong signal again.
Current theory's:
- Dish is off on all satellites, stronger signal on 28.2, 19e means it works?
- Dish is no longer on correct azimuth (up/down right) so arc tracks out of alignment?
- Dish has rotated on motor spindle, motor on pole, and whole lot is slightly out left/right but stronger signal on 28.2 means it does not have to be nudged?
- Something to do with motor supposedly knowing where the satellites are has gone wrong?
Thanks for any help...