Diablo CAM + Channel 4

T

ttquattroman

Member
My Satellite Setup
Humax hdci-2000
Diablo light CAM
Sky freeview card
My Location
Surrey
Hi,

I would be grateful for any help.

I have a Diablo Light + Sky freesat (yellow) house card. Using the CAS studio software I have upgraded my CAM to 3.35.

Placing the CAM + card into my Humax HDCI2000 (with the card upside down (as compared to how it is in a sky box) I cannot get Channel 4.

The sky card has been activated in the sky box and I can get Chan4 with the sky box.

I must be doing something wrong - can anyone help

Rgds

Peter
 
Welcome to the forum ttquattroman

Well I am not sure what you exactly mean as it is unclear from your post if you are unable to get Channel 4 persay or the channel 4 High Definition test, what is the frequency you are trying to get it on
 
The Diablo Cam and Stealth 335 will not open any S*y channels, including FTV channels.
Only one Stealth file did this and I can't remember which one.
You can either search the web or try loading some of the earlier stealth files onto your cam.
Hopefully someone reading your thread might remember which Stealth file worked.
 
I have loaded 2.15, still no joy.

Someone on there must be using the Diablo light, sky yellow house card and Humax hdci-2000 combo to watch Channel 4 HD.

If so I would really appreciate there help.

Rgds


Peter
 
I'm using 2.34, S*y card and Ch4 working fine in my Humax 2000 and Diablo.

In the cam menu - configuration, set CAIDs to UK.

Probably works with 2.35 too (if that's what you mean, never heard of a 3.35 (?)

Llew
 
Hi,

Yeah sorry I meant 2.35, did you have to do anything special with your Humax. I can get BBC HD no problem, but if I select, with the CAM and card installed (with the card yellow house symbol down), channel 4 the onscreen message shows it as scambled and I get no picture, do I have to select channel 4 and then wait a period of time?? I have tried this with CAIDS and CAID UK selected.

I am really after CH4 HD

Any other settings I need to make??

I was advised that SKY cards only worked with Stealth 2.15.

Thanks

Peter
 
I have to wait about ten seconds for CH4 to open. Occasionally, I need to remove the card and replace, or go to another FTV channel, wait for it to open, then back to CH4.

CH4 HD is a problem with the Humax. Usually you just get audio only. Depends which FW version you have. If you have 1.00.15, try going back to 1.00.11, I understand this gives video too.

I use a Fortec Passion HD stb when I want to use my S*y card, the Humax is too quirky.

Still, as I said, it does work OK in mine using Stealth 2.34 notwithstanding the occasional juggling about with card and channel changing mentioned.

FYI, my cam config is as follows -

CAIDS File UK
Auto PMT On
Emulators On
N3 AU On
Emulator Priority 1. Emu 2.CAIDS
Fixed CW Off

Llew
 
Hi, So I have made the necessary changes and my config looks like this;

<config LANG="ENGLISH" ENABLE_ADMIN_PIN="N" ADMIN_PIN="3325" SMART_MESSAGES="Never" MULTIMEDIA_MESSAGES="Show Normal" DELAYER="0" BASE_IP="0000" LEDS="Y" AUTO_PMT="Y" CAIDS_FILE="UK" EMU_PRIORITY="1:Caids - 2:Emu" NAGRA_BOX_KEY="0000000000000000" CAS_Conax="N" CAS_Seca="N" CAS_Irdeto="N" CAS_Via="N" CAS_Cryptoworks="N" CAS_Dreamcrypt="N" CAS_Nagra="N" CAS_DGCrypt="N" EMULATORS="Y" N2_AU="Y" FIXED_CW="N" />

But still no joy with chanell 4, still says scambled and I get no picture or sound.

Also in the channel menu I cannot see chanel 4 HD.

As always all help gratefully accepted.

Rgds

Peter
 
I don't have all those options on 2.34 (enable admin, multimedia messages, LEDS, Nagra Box key). Just the ones in the menu I described.

I have the priority as 1. emu 2.cards, but it doesn't matter here if you are only using with a S*y card.

CH4HD may be shown in your list as 3095 or 3017 if you scan for that freq.
 
Well now I have Chan 4 HD sound and a very broken picture (sig =40% qual = 0-7%)

Looks like I will have to move the dish to improve the signal.

Anyone able to get Discovery HD with the Diablo light cam, if so could you reveal all.

Thanks

Peter :)
 
Not with a Freeview card. You can get the German version though on Astra 19E (only German audio).

Llew
 
Back
Top