statalite
Member
- Joined
- Nov 3, 2009
- Messages
- 781
- Reaction score
- 315
- Points
- 63
- My Satellite Setup
-
Nova-HD-S2, Dr HD D15, Free sat V7S, Free sat v8 finder V-71HD
Zone 1 @ 28.2°E
Zone 2 @ 19.2°E with 28.2°E and 13.0°E
Channel Master 1.0m (to be setup)
Channel Master 1.2m (to be setup)
SMR 1224
- My Location
- UK Midlands
Hi All,
I'm about to venture into setup my first DiSEqC motor with an 80cm dish , I'm aware there's already some guides on the site and I will be reading as much as I can.
I purchased two second hand technomate motors, mainly because the first one didn't come with all the parts.
Both, however when I tell my portable meter "go to reference" the arm(s) does go to zero but it appears to be something like one millimeter off zero and I'm wondering if this is more 0.8w. Is this normal behavior? Could this be a coincidence?
Responses welcome.
I'm about to venture into setup my first DiSEqC motor with an 80cm dish , I'm aware there's already some guides on the site and I will be reading as much as I can.
I purchased two second hand technomate motors, mainly because the first one didn't come with all the parts.
Both, however when I tell my portable meter "go to reference" the arm(s) does go to zero but it appears to be something like one millimeter off zero and I'm wondering if this is more 0.8w. Is this normal behavior? Could this be a coincidence?
Responses welcome.