DM600 + Gemini + Irdeto

R

RUGRLN

Member
My Satellite Setup
DM60PVR
My Location
Chaprus
Hey,

So I've got a Dreambox 600PVR with Gemini Image [I dunno which version, didn't install myself] and I've got an original Irdeto card for the ART bouquet.

Now what have I got to do to get it to work? I've installed CCCam/NewCS/Scam/RonaldCS/MgCamd loads of stuff, but I can't get any of the channels to work, any help would be greatly apprecited!!

Please reply ASAP!!!
 
RUGRLN said:
Hey,

So I've got a Dreambox 600PVR with Gemini Image [I dunno which version, didn't install myself] and I've got an original Irdeto card for the ART bouquet.

Now what have I got to do to get it to work? I've installed CCCam/NewCS/Scam/RonaldCS/MgCamd loads of stuff, but I can't get any of the channels to work, any help would be greatly apprecited!!

Please reply ASAP!!!
Click to expand...

Insert the smartcard with the chip down into the card slot WHILE THE RECEIVER IS UNDER SHUTDOWN STATE, then switch on the receiver, select CCcam and hopefully it will open the channels.
You can also try to check the entitlements from your PC.
This might be of interest:
http://www.satellites.co.uk/satellite/dreambox7000/147477-dreambox-7000s-card-readers.html
 
Thanks for your help...I tried CCCam various times but it didn't work, so then I went back to BlueBtn/Cams/ and found one which caught my eye Scam1.xx [can't rmbr the number] tried that too, but didn't work..
After a few hours I tried again CCCam..nothing...tried again Scam and it worked fabulously!!!

Dunno y CCCam didn't work, but atleast it works...woohoo!
Thanks for ur help!!

BTW, what's the difference between the two?

PlZ READ:
I read some ppl use these Cams like Softcam to Cardshare? I'm not interested in that, but I did find a Softcam option in my Dreambox Settings...I've taken out the network cable just in case, but what's the deal??
 
RUGRLN said:
Thanks for your help...I tried CCCam various times but it didn't work, so then I went back to BlueBtn/Cams/ and found one which caught my eye Scam1.xx [can't rmbr the number] tried that too, but didn't work..
After a few hours I tried again CCCam..nothing...tried again Scam and it worked fabulously!!!

Dunno y CCCam didn't work, but atleast it works...woohoo!
Thanks for ur help!!

BTW, what's the difference between the two?

PlZ READ:
I read some ppl use these Cams like Softcam to Cardshare? I'm not interested in that, but I did find a Softcam option in my Dreambox Settings...I've taken out the network cable just in case, but what's the deal??
Click to expand...

Hello RUGRLN,
I am glad that you got it working. I know exactly how good this feels.:)
It should work with CCcam. Try connecting to the receiver using a browser then type http://Dreambox IP:16001 and it should give you a heading like
Welcome to CCcam 2.0.11 server
Then check the card entitlements.
There is no reason to take out the network cable. It is a good idea to connect to the internet this way so that you can add/update plugins using the blue button.
 
Alright, I'll try that, but it could be because the Irdeto cards have a pin [6962?], so maybe CCCam didn't have the PIN? I heard ppl have this prob, where should it be entered?
 
RUGRLN said:
Alright, I'll try that, but it could be because the Irdeto cards have a pin [6962?], so maybe CCCam didn't have the PIN? I heard ppl have this prob, where should it be entered?
Click to expand...

Yes. This might be the reason.
I wouldn't mess with the PIN number, but if you must, you can try to reset it to a default value like [0000]
If you have an Irdeto CAM and another receiver, you can change it using the parental menu.
There might be a better way using the CCcam cofiguration file.
 
Ok...I'll try this l8r a bit busy now, but another Q, a lot of ppl say that to change all this stuff you gotta Telnet or FTP, well I got a FTP program so I should be able to just use FTP to edit the configuration file right? But where exactly is it located? I couldn't find it, only Scam I found...
 
RUGRLN said:
Ok...I'll try this l8r a bit busy now, but another Q, a lot of ppl say that to change all this stuff you gotta Telnet or FTP, well I got a FTP program so I should be able to just use FTP to edit the configuration file right? But where exactly is it located? I couldn't find it, only Scam I found...
Click to expand...

For a simple editing, I usually do it directly from the receiver using Tuxbox Commander, then browse to the correct subfolder. Saves me the hassle of using the PC.
Install it from the Gemini server using the blue button.
There is a tutorial for it in the Idiot Guide.
 
And this Idiot Guide would be where?? Tuxbox on my TV is off the screen btw...and the directories are in the Idiot Guide, right?
 
Back
Top