djlemur
Regular Member
- Joined
- Jul 30, 2004
- Messages
- 113
- Reaction score
- 0
- Points
- 0
- Age
- 58
- Location
- Hampshire, UK
- My Satellite Setup
- DM7000 + 300Gb + Gemini, HH100 Rotor, 0.8m Offset Dish, 0.3db Invacom LNB
- My Location
- Hampshire, UK
Hi Folks,
Does anyone know if there is a hardware or software mod out there to stabilise the network port on a rev. 1 DM7000 (blue screen)?
I have an issue with the port locking up if I try to copy a file OFF the box )(-red - usually after 10Mb or so has copied.
I can copy files ONTO the box all day long without issue!
Infact I use my friendly uTorrent client to get most TV progs from the US, copy them onto the DB and watch them in 5.1 this way.
The base image (installed using FWPRO 6.3) is the latest CVS image from IHAD. The main image is Gemini 3.4 (whatever the latest is!). The front panel firmware is at 1.6.
Once the port has locked the ONLY way to reset it is to manually change its IP setting to a different address and back again.
Google returns zillions of 7020 network issues but nothing about the 7000!
Does anyone know if there is a hardware or software mod out there to stabilise the network port on a rev. 1 DM7000 (blue screen)?
I have an issue with the port locking up if I try to copy a file OFF the box )(-red - usually after 10Mb or so has copied.
I can copy files ONTO the box all day long without issue!
Infact I use my friendly uTorrent client to get most TV progs from the US, copy them onto the DB and watch them in 5.1 this way.
The base image (installed using FWPRO 6.3) is the latest CVS image from IHAD. The main image is Gemini 3.4 (whatever the latest is!). The front panel firmware is at 1.6.
Once the port has locked the ONLY way to reset it is to manually change its IP setting to a different address and back again.
Google returns zillions of 7020 network issues but nothing about the 7000!