7mdish
Regular Member
- My Satellite Setup
- CM 2.4m motorised offset dish, Viking Ku-band 2-ports motorised feed, 2 SMW LNBs, RC2000A, Dreambox DM920.
- My Location
- Milan, Italy
I'm attempting to setup my DM920 with 2 dishes but I failed until now.
The box is equipped with a double multistream tuner, so 2 F connectors are present on the back panel. Image is Openatv 7.0.
Tuner 1 is for a dual feed dish (13E and 19.2E satellites);
Tuner 2 is for a 28.2E dish.
Tuner 1: diseqc 1.0, 13E port A, 19.2E port B. It works.
Tuner 2: Advanced mode, no diseqc, 28.2E satellite selected. It does not work.
Performing a channel search with tuner 2 no channel are found.
But, disconnecting the 28.2E dish from tuner 2 F connector and connecting it to the tuner 1.... channel are found and it seems to work.
In other hands, it seems that all signals are received from just one F connector (tuner 1) instead of two, the second one never works.
Also, I tried to disable all additional tuners (FBC virtual tuners, from 3 to 8), but nothing changed.
There is surely something wrong in my configuration, but I need advices to understand how to set up both tuners properly.
Please note that such configuration (exactly the same one described above) works flawlessly in a Vu+ box with the same image installed, but not in the dreambox. Thanks.
The box is equipped with a double multistream tuner, so 2 F connectors are present on the back panel. Image is Openatv 7.0.
Tuner 1 is for a dual feed dish (13E and 19.2E satellites);
Tuner 2 is for a 28.2E dish.
Tuner 1: diseqc 1.0, 13E port A, 19.2E port B. It works.
Tuner 2: Advanced mode, no diseqc, 28.2E satellite selected. It does not work.
Performing a channel search with tuner 2 no channel are found.
But, disconnecting the 28.2E dish from tuner 2 F connector and connecting it to the tuner 1.... channel are found and it seems to work.
In other hands, it seems that all signals are received from just one F connector (tuner 1) instead of two, the second one never works.
Also, I tried to disable all additional tuners (FBC virtual tuners, from 3 to 8), but nothing changed.
There is surely something wrong in my configuration, but I need advices to understand how to set up both tuners properly.
Please note that such configuration (exactly the same one described above) works flawlessly in a Vu+ box with the same image installed, but not in the dreambox. Thanks.
