Log in
Register
Menu
Log in
Register
Home
What's new
Latest activity
Authors
Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Linux Based Receivers
Dreambox Support Forum
Dreambox Satellite Receiver | Tutorials | Software
Dreambox 600
dreambox 600 loopback ????
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="shumifan50" data-source="post: 680088" data-attributes="member: 265778"><p>Depending on the number of satellites you want to receive and which ones, it might be possible to set up a fixed dish with a multi-lnb bracket. This could typically give you up to 4 satellites. I have a 90cm dish with a multi-lnb bracket and 4 quad LNBs pointing at 28.2e, 23.5e, 19.2e and 13e. This allows each dreambox connected to all the LNBs through its own diseqc switch to select satellite/channel independently. In your case it would require 4 dual lnbs mounted on a multi-bracket if you want to feed 2 x dreamboxes. Then each can independently select the satellite/channel as it is done through 2 x diseqc switches, one per dreambox. It also has the advantage if instant satellite switching as you dont have to wait for a motor to move the dish. Downside is the satellites have to be within 20 degress of each other and the closest they can be to each other is about 3 degrees, otherwise the LNBs jam against each other. In my case I had to shave the 23.5 and 19.2 LNBs slightly to get them closer together. You also need a bit of a bigger dish as the all the LNBs are not perfectly alligned and there is some signal loss because of this slight offset.</p></blockquote><p></p>
[QUOTE="shumifan50, post: 680088, member: 265778"] Depending on the number of satellites you want to receive and which ones, it might be possible to set up a fixed dish with a multi-lnb bracket. This could typically give you up to 4 satellites. I have a 90cm dish with a multi-lnb bracket and 4 quad LNBs pointing at 28.2e, 23.5e, 19.2e and 13e. This allows each dreambox connected to all the LNBs through its own diseqc switch to select satellite/channel independently. In your case it would require 4 dual lnbs mounted on a multi-bracket if you want to feed 2 x dreamboxes. Then each can independently select the satellite/channel as it is done through 2 x diseqc switches, one per dreambox. It also has the advantage if instant satellite switching as you dont have to wait for a motor to move the dish. Downside is the satellites have to be within 20 degress of each other and the closest they can be to each other is about 3 degrees, otherwise the LNBs jam against each other. In my case I had to shave the 23.5 and 19.2 LNBs slightly to get them closer together. You also need a bit of a bigger dish as the all the LNBs are not perfectly alligned and there is some signal loss because of this slight offset. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Linux Based Receivers
Dreambox Support Forum
Dreambox Satellite Receiver | Tutorials | Software
Dreambox 600
dreambox 600 loopback ????
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top