Dreambox 7025+V-box : How to configure ?

[khaledxp]

Hi everyone !
I have got a dreambox 7025. I want to configure it with A V-box. Can anybody help?

 

[rolfw]

Just use DiSEqC 1.2 as if it were a DisEqC motor.

 

[CROSSBONES]

Set tuner A to:-
Configuration mode= Advanced
satellite Astra 19 East (do this for every sat you want to store)
Voltage mode= Polarisation
Tone mode= band
Use usals for this sat = no
LNB= LNB 1
Diseqc mode= 1.2
Toneburst= none
Commited Diseqc command= none
Fast diseqc= no
Sequence repeat= no
Command order= commited, toneburst
UnCommited diseqc command = none
Diseqc repeats= none
Longitude= Enter your coordinates
Latitude= Enter your coordinates
LOF = universal LNB
Increased voltage= yes
Stored position 01 (give every sat a different no)

Store the same number in the vbox, you do this in the positioner set up menu in the 7025;)

 

[khaledxp]

Thank you both for your help.
Just some other questions :
Are my Lat. + Long. coordinates really necessary ? Aren't they configured when you are using USALS ?

The DM 7025 has got 2 entries for Lnbs. Do I have to link them with a coax. cable. I read this somewhere.

I have both DM 7020 and 7025. Which one shall I keep ?

Just be Patient . I am a beginner and it sounds you are highly professional.

Thank you in advance

 

[khaledxp]

Thanks again. I have tried it and it works perfectly well.

 

[CROSSBONES]

Set tuner B to same as tuner A, or nothing connected, all depends what you have connected. there is a link cable, but you will need a twin lnb to record one whilst watching another channel, on a different transponder.

Keep the 7025 over the 7020, twin tuners and Enigma 2, more stable than the 7020 which uses Enigma 1

Just be Patient . I am a beginner and it sounds you are highly professional.

Who is that rolfw guy any how?;)