gameboy said:
Foud this on Toe and ran it through a translator... I have posted the original German text below for Haggard to work on!!! Doesn't make much sense to me.
New in Dream Control Centre v 2.1
Support DreamFlash v2.3 it is supported primarily this version. The old routines are contained, the functionality is restricted. Older DF-versions, should remain also in DCC v2.0.
Installation DF v2.3 incl. Setup after the installation is carried out by a Config-Panel, that corresponds to the Setup of DF. It could be undertaken by DCC and installed become Skins. Available images, the file "go" is adapted to the DF-version. It must be active in the Flash-image.
Configuration DF v2.3 in tools - DreamFlash - Install DreamFlash new switch "Config DF". If the Flash-image is active, the configuration of DF can become changed incl. Skin-selection and installation.
Installation selection DF-Skins the corresponding Button is in the configuration for DreamFlash (see prior point). The Skin-files must exist (*.skin to the installation in unpacked form + *.png) and are copied into the Skin-path. The selection out of all Skins in this path is undertaken with the Pulldown-menu.
Some bow faxes - new start with Reconnect gefixt. - Deleting of symbolic to the left in FTP. - Various..
Much joke.. BernyR
The above, presumaby a babel-fish type translation is just a 1-2-1 mapping of words, ignoring German grammar and syntax. Surprisingly, it's not much different from a grammatical translation - see below.
It doesnt tell me much
German text... plus transl (Ed)
Neu in DCC v 2.1
New in DCC v 2.1
Support DreamFlash v2.3
Es wird in erster Linie nur noch ab dieser Version unterstützt. Die alten Routinen sind zwar noch enthalten, doch ist die Funktionalität eingeschränkt. Wer bei älteren DF-Versionen bleiben möchte, sollte auch bei DCC v2.0 bleiben.
Primarily, only versions from this one onwards will be supported. The old routines are certainly still there, but their functionality is limited. If you want to stay with old DF version, then stick with DCC v2.0.
Installation DF v2.3 incl. Setup
Nach der Installation wird ein Config-Panel ausgeführt, das dem Setup von DF entspricht. Es könne alle Einstellungen von DCC aus vorgenommen werden und Skins installiert werden. In allen bereits vorhandenen Images wird die Datei "go" an die DF-Version angepasst. Es muss das Flash-Image aktiv sein.
After installation, a config panel will run, corresponding to the setup of DF.
All DCC settings can be fed in and skins installed. In all existing images, the file "go" is matched to the DF version. The flash image must be active.
Konfiguration DF v2.3
In Tools - DreamFlash - Install DreamFlash ist ein neuer Schalter "Config DF". Wenn das Flash-Image aktiv ist, kann hier die Konfiguration von DF verändert werden incl. Skin-Auswahl und Installation.
Configuring DF v2.3
In Tools > DreamFlash > Install DreamFlash, there is a new button "config DF". If the flash image is active, then this allows the DF configuration to be changed, including skin and installation.
Installation/Auswahl DF-Skins
Der entsprechende Button befindet sich in der Konfiguration für DreamFlash (siehe vorheriger Punkt). Die Skin-Files müssen zur Installation in ausgepackter Form vorliegen (*.skin + *.png) und werden in den Skin-Path kopiert. Die Auswahl aus allen Skins in diesem Pfad kann mit dem Pulldown-Menü vorgenommen werden.
Installation/ Choosing DF-skins
The button for this can be found in DreamFlash configuration (see previous point). The skin-files must be unpacked and ready before installation (*.skin and *.pbg) and are copied into the skin-path. Choosing a skin from this path can be done from the pulldown menu.
Einige Bugfixes
- Neustart mit Reconnect gefixt.
- Löschen von symbolischen Links in FTP.
- Diverse...
A few bug fixes
- Restart when reconnecting fixed.
- Symbolic links in FTP deleted.
- Various . . .
I don't see the German for "Much joke" but I guess this was "Viel Spass" which means "Have fun" (Ed).
