EBSPro, CrazyScan Tips&Tricks Newbie Questions

There is no error or crash with the tbs5927 card scanning low symbol rates at 23.5E.I used Crazyscan,EBS,Dream DVB and SmartDVB and all apps have locked these low symbol rate.
regards
 

Attachments

  • 23.5E-tbs5927_low symbol rate_2018-08-11_23-59-10.webp
    23.5E-tbs5927_low symbol rate_2018-08-11_23-59-10.webp
    67.1 KB · Views: 50
  • 23.5E_tbs5927_2018-08-11_23-10-35.webp
    23.5E_tbs5927_2018-08-11_23-10-35.webp
    56 KB · Views: 58
  • 23.5E_tbs5927_locked symbol rate_2018-08-12_0-06-32.webp
    23.5E_tbs5927_locked symbol rate_2018-08-12_0-06-32.webp
    26.4 KB · Views: 46
  • 23.5E_tbs5927_lock symbol rate_2018-08-12_0-28-53.webp
    23.5E_tbs5927_lock symbol rate_2018-08-12_0-28-53.webp
    28.2 KB · Views: 59
Ok, i will test it on another pc and will write. Scan of tp is also no problem, only try to playing and smart crashes :-(
 
mar-val said:
tuner works from 950 to 2050

5150 - 950 = 4200
5150-2050 = 3100
Click to expand...

tuner work from 300 to 2500 ( only on out range occasional crazy)
 
Exemple where i have problem. When i want run TSReader on the TP selected lower it stops working - EBS freeze and i need to kill them with task manager. I think that here could be problem with my unstable LNB Inverto Black Ultra (+- 1 MHz).... Probably can´t lock and no timeout to cancel the operation?

P.S. I use Stephan´s methode for LowSR and works perfectly!

EBS-TSReader.webp
 

Attachments

  • HispasatCrazyScan.webp
    HispasatCrazyScan.webp
    110.7 KB · Views: 56
dishdx said:
Exemple where i have problem. When i want run TSReader on the TP selected lower it stops working - EBS freeze and i need to kill them with task manager.
Click to expand...
It may be a problem of trimming between TSReader and EBSPro.
does this happen also by calling the tool "search and analyze transonder"?ebspro.webp
 
Hi! I still have the problem on SR <500 on all of the DVB SWs like SmartDVB, AltdDVB, ProgDVB etc... It crashes! In smart DVBS is possible to see debug info, other crashes totally or with BSOD with reason "tbs5927.sys" crash and i need to restart pc. I cant play SR<500. Only one way is CrazyScan + VLC, and sometimes EBS+VLC.

I use Windows 10 64bit, TBS 5927, Win 10 driver version 1.0.4.

How is possible to solve this problem? Where is problem? In device? In driver? What can i do? Should i send the device back to seller for repair?
 

Attachments

  • IMG_20190116_223820.webp
    IMG_20190116_223820.webp
    59.4 KB · Views: 38
  • screenshot0.webp
    screenshot0.webp
    61.2 KB · Views: 32
  • smartdvb-logreport.zip
    smartdvb-logreport.zip
    964.9 KB · Views: 4
driver bug
 
Crazycat, Thank You for info. And how can i solve it? Exists some other driver than the official one on the tbs website without this bug? Or will it be repaired? I have this problem cca 6 months and the driver on the web is still the same... Thank you for help. I use your Crazyscan for detail analyse, but for normall watching/listenig i use SmartDVB and ProgDVB and with this bug i cant listen interesant radios:-(

CrazyCat said:
driver bug
Click to expand...
 
SmartDVB can work via my StreamReaderEx (some like CrazyScan Blindscan device). And latest DVBDream 3.x also have similar device module.
 
Bad news. It doesn´t helped.. Smart DVB still crashes:-( Interesting is, that 6 months ago i had no problem to receive low SR on Crazyscan/EBS (SWith smart i had same problems like now) and now i can´t lock nothing below 500. Blindscan find this tps, but no lock. I thought that in winter will it be better than in summer. So could it be some hw problem with receiver? Its is strange. Above 500 no problem with Smart and EBS, below 500 problems in both SWs..

LNB is IBU! (+-1 MHz). I know not good for low SR... but could this do this crash problems??
 
Hello,
today, out of curiosity I tried to use SmartdVB.
my installation (among others) : KU Band LNB with disceq 1.1 command 4 (TBS6983)
I work with a windows 64 PC
I have tried all possibilities, I can't get the signal (with AltDVB OK)
If someone can tell me where I make a mistake ?

setting1.webpsetting5.webpsetting3.webpsetting4.webp
 
Hi,
i use Florian BDA device and disecq Committed LNB4
It's the only way i can make it work even if i usually use AltDVB

Hope this helps
 
Why use the DiSEqC command when you can access it directly if you don't have a DiSEqC switch?
For diseqc 1.1 choose uncommited.
 

Attachments

  • 3-2022-08-18_17-49-32.webp
    3-2022-08-18_17-49-32.webp
    50.6 KB · Views: 16
  • 1-2022-08-18_17-48-26.webp
    1-2022-08-18_17-48-26.webp
    47.4 KB · Views: 14
  • 2-2022-08-18_17-48-41.webp
    2-2022-08-18_17-48-41.webp
    47.8 KB · Views: 15
  • 4-2022-08-18_17-51-07.webp
    4-2022-08-18_17-51-07.webp
    111.2 KB · Views: 15
  • 1-022-08-18_18-02-38.webp
    1-022-08-18_18-02-38.webp
    103.3 KB · Views: 18
satesco said:
Why use the DiSEqC command when you can access it directly if you don't have a DiSEqC switch?
Click to expand...
I don't know if you're talking to me but i have a Spaun SAR 411 switch and i must use committed to make it work whit ALT/SMART DVB
 
Last edited:
A question;
is the (SR) next to the polarization in the columns ?!
And you can determine / fill in the values yourself.

Best regards
 
MrDish1 said:
A question;
is the (SR) next to the polarization in the columns ?!
And you can determine / fill in the values yourself.

Best regards
Click to expand...
Yes, of course, you can input all the values shown in the picture.
In the left panel you can find presaved frequencies stored in a .ini file.
In the right panel you can manually scan a TP fillin in all the needed parameters
 
Hallo , using 0.5.1.1 x64 Beta1 it works perfectly.:Y
with 0.5.3.26 x64 Beta 1 it does not work. :confused
 
In the left pane, you will find pre-saved frequencies stored in an .ini file.
In the right panel you can manually scan a TP fillin and fill in all the necessary parameters
And where can I find that ,the left and right panel.?!
 
Back
Top