elevation control With a diseqc actuator

[Archived-1]

Sorry for the late reply Martin. I use the Inverto single C120 with Precision feed on this dish

Thank you scopus, why the need for elevation control please, do you chase inclined orbits ?.

 

[Archive-8]

I see most people with "inclined" satellites are using h2h mounts. Has anyone got a pic or 2 please of this type of setup, on a polar mount ?

 

[scopus]

Thank you scopus, why the need for elevation control please, do you chase inclined orbits ?.

I do indeed Martin, I do a bit of feedhunting, when I get time that is. It was very useful in the days when ITV/BBC/ SKY had there feeds on inclined birds, not so much these days now.

 

[scopus]

I see most people with "inclined" satellites are using h2h mounts. Has anyone got a pic or 2 please of this type of setup, on a polar mount ?

Have you have seen my picture of the SSS polar mount with elevation jack Chris?

 

[Archive-8]

Have you have seen my picture of the SSS polar mount with elevation jack Chris?

Not seen any polar mounts with elevasion control on it.

I will re-read the posts abit later on.

 

[Archived-1]

I do indeed Martin, I do a bit of feedhunting, when I get time that is. It was very useful in the days when ITV/BBC/ SKY had there feeds on inclined birds, not so much these days now.

This has been my final goal for 5/6 years now , I now have everything to put it in place apart from time , I will keep plugging away as I have been doing and in the coming months all should be setup

Look here Chris.

http://www.satellitesuperstore.com/satellite_diseqc_motors_36_volt_motors.htm

 

[scopus]

Yep, time is the biggest problem.

 

[Archived-1]

Yep, time is the biggest problem.

Its all sat waiting for me, I will be making another mount, the one I started for the 1.8 I might finish it for the 1.2, but I need to finish the 1.5 first.

 

[Captain Jack]

I see most people with "inclined" satellites are using h2h mounts. Has anyone got a pic or 2 please of this type of setup, on a polar mount ?

The type I made (check my Gibby 1.5m thread) can be used on anything - it just bolts in place of the dish - declination control rather than inclination.

 

[Archive-8]

The type I made (check my Gibby 1.5m thread) can be used on anything - it just bolts in place of the dish - declination control rather than inclination.

I will have a read through and see if I can find some where to get it done:-)

 

[Channel Hopper]

Plenty of threads on this site Chris.

 

[SystemSAT]

Great stuff. We've had those motors for ages in the back room, we should have listed them ages ago, The offer came and we're down to singular units.

For anyone that would like a 24" Actuator - we've got one left !

Email or call us to order