elvis programmer

Rog1

Rog1

Member
My Location
pj::
Hi nobby
Thanks for your help.
Can you help me with this one please
Can you send me an idiots guide to programming a gold card on elvis ie steps from 1 to 20
many thanks
Roger.
 
Which software are you using on the elvis?

wolsty
 
OK Roger,

Get your file and unpack it into an easily navigable directory (isolate which files you require)

  1. Start up the banana
  2. Make sure the setup tab is set to the right com port
  3. Got to MP set and switch on
  4. Go to auto detect and select pic cards (you can skip this stage if you know your card)
  5. Go to Pic cards and select Gold card
  6. Press the load tab and navigate to your pic file, when found press OK
  7. Then press the Eeprom tab and navigate to and OK your Eeprom file
  8. It may be beneficial to turn off Fast Write
  9. Press Program.....and Robert is a relative. :)
    [/list=1]
 
Back
Top