eurobird 2 25.5e

T

terriers

Regular Member
My Satellite Setup
protek 9600,tm5400
2.4m on nilesat
1.8m on 36e
90cm motorised
My Location
worksop notts
Hi guys...just wondered if anyone out there is getting good reception off this bird 25.5e...the edge of the footprint is in france and requires a dish size of 1.5-1.9 so should be achievable?????.....i have 2 dishes a 1.8m and a 2.4m....the 1.8 is free at the moment and is what id like to use...i would really appreciate any input from you guys.....oh and i,m in north notts..and its the orbit package i,m interested in....
 
terriers said:
Hi guys...just wondered if anyone out there is getting good reception off this bird 25.5e...the edge of the footprint is in france and requires a dish size of 1.5-1.9 so should be achievable?????.....i have 2 dishes a 1.8m and a 2.4m....the 1.8 is free at the moment and is what id like to use...i would really appreciate any input from you guys.....oh and i,m in north notts..and its the orbit package i,m interested in....
Click to expand...

Using Fortec 240 cm (Invacom LNB) dish I'm getting quite strong signal on 11013 H, 11054 H and 11096 H (DM800: 12dB). 11681 H is weaker (DM800: 8dB). Usually nothing at all on 11604 H, although I managed to lock the signal in very specific weather conditions. I get about the same results with IRTE 180cm (MTI LNB).

The good thing is that you can get those 11604 H Orbit channels from 8°W.
 
Hi,terriers
I will be moving my 2.4M Channel Master Dish from Nilesat 7 West,
over too Eurobird 2 25.5 East this month.To see what sort of signal i
can get on Eurobird 2 25.5 East

John896
 
drhans said:
The good thing is that you can get those 11604 H Orbit channels from 8°W.
Click to expand...

If the rumours are correct not for much longer!
 
cheers john896....i currently have my 1.8 on 26e but only using a standard lnb due to the c120 being on the 2.4 and i dont want to move it as its taken a while to get the best signal off 7west.....its pulling the mbc chanels in brill with 80% quality in the afternoons...i would like to move the 2.4m here if their is decent reception?.....looking at the footprints for eurobird 2 we should easily get it with a 2.4
 
I will be interested to know what sort of signal,i can get on 25.5East.
And even more so on 11096 H (Showsports 1,2) and 11681 H (Showsports 4).
Does anybody know if an official Showtime Viewing Card for 7 West,would open
these channels on 25.5East they both use Irdeto2.Thanks
 
its open on the hbs innovative lan receiver...as are showtime,jsc,art on 7west....and orbit on 8west...and free of course
 
What are they who said they are going where did you read it.
Analoguesat said:
If the rumours are correct not for much longer!
Click to expand...
 
antenna1 said:
What are they who said they are going where did you read it.
Click to expand...

Rumours say Orbit will leave 8W in the next few weeks. It was a post on the DS forum, and we have asked the original poster for the source of his info although he hasnt replied yet.
 
JOHN896 said:
I will be interested to know what sort of signal,i can get on 25.5East.
And even more so on 11096 H (Showsports 1,2) and 11681 H (Showsports 4).
Does anybody know if an official Showtime Viewing Card for 7 West,would open
these channels on 25.5East they both use Irdeto2.Thanks
Click to expand...

It won't work. They use different Irdeto cards.

OrbitShowtime 25,5°E = 0668
OrbitShowtime+ADD 7°W = 0604
 
Afraid of the 8°W Orbit switch-off, I pointed my 2,4m Fortecstar dish to 25,5°E again today. After a few hours, I have finally managed to pull in stable signal from all Orbit transponders, including 11604H. The key to receiving 11604H was blocking the Astra2/EB1 signal as you can see in the attached photo.

Could it really have been 11604 V at 28,5°E blocking the signal? This TP seems to be active since October 2008 which would explain why I could receive Orbit's 11604H just fine before then (if I remember correctly).

Anyway, the signal levels are now as follows (15:45 CET, DM800, Invacom 0,3 LNB, 50m long coax cable, 1 diseqc switch):

11013 H: 10,0 dB
11054 H: 9,9 dB
11096 H: 9,8 dB
11604 H: 6,7 dB
11681 H: 8,1 dB
 

Attachments

  • P1010025.webp
    P1010025.webp
    204.9 KB · Views: 82
  • P1010024.webp
    P1010024.webp
    44.3 KB · Views: 66
You could be unlucky in that the sidelobe pattern for the Fortecstar 2.4m that the first side lobe comes in at 3° from mainlobe which would explain the interference you get from 11604V.

Have you checked your dish is perfectly straight with strings?
 
Telia said:
You could be unlucky in that the sidelobe pattern for the Fortecstar 2.4m that the first side lobe comes in at 3° from mainlobe which would explain the interference you get from 11604V.

Have you checked your dish is perfectly straight with strings?
Click to expand...

I think you're right. The poor dish assembly is probably causing this. I pretty much doubt the dish is perfectly straight but I'm afraid that trying to fix that would make things even worse. Might have no choice when Badr 5 and Nilesat 201 arrive, though :)
 
Back
Top