dankargo
Specialist Contributor
- Joined
- May 11, 2014
- Messages
- 729
- Reaction score
- 456
- Points
- 63
- Age
- 33
- Location
- Brentwood, UK
- My Satellite Setup
- 90cm Motorised
- My Location
- Brentwood
Hi guys,
My 10 year old dish has started to rust at the back and sides which has left me very very tempted to bin it and replace it with an 88cm. I've planned to replace the fixings with something more sturdy in any case but just wondered if upgrading the dish by 10cm would give me a major improvement from my current one.
On the strong sats I usually get around 80-85%, about 58-74% on the Nordic 1w beam and feeds vary, some of the weaker ones I can't get at all.
I've attached photos of my current dish - it's been up since about 2006 so over a decade old! I have a TM-2300 motor that I only put up last year, also considering changing this if I do decide to upgrade dish.
My 10 year old dish has started to rust at the back and sides which has left me very very tempted to bin it and replace it with an 88cm. I've planned to replace the fixings with something more sturdy in any case but just wondered if upgrading the dish by 10cm would give me a major improvement from my current one.
On the strong sats I usually get around 80-85%, about 58-74% on the Nordic 1w beam and feeds vary, some of the weaker ones I can't get at all.
I've attached photos of my current dish - it's been up since about 2006 so over a decade old! I have a TM-2300 motor that I only put up last year, also considering changing this if I do decide to upgrade dish.