Zorba
Regular Member
- Joined
- Jun 13, 2003
- Messages
- 2,201
- Reaction score
- 7
- Points
- 38
- Age
- 63
- My Satellite Setup
-
3m(28.2E),1.5m(19.2E.13E,10E),1m (4W ,7W)1m (?).diseqc 10,sky plus,VU+,telergy iptv.
Satlook nit colour + Horizon hdsm.
- My Location
- Limassol, Sunny Cyprus
Does anybody have experience with the Goodmans GFSAT100SD receiver?
The problem I have is that on installing this receiver here in Cyprus on a 3m dish( which receives 2D very good) is I get the message that the signal is less than 50% and I should check the alignment of the dish(cheeky box !).
I cannot get rid of this message and cannot access the menu.In fact I have pressed all buttons on the remote and apart from on/off nothing happens.
I have connected a normal digibox and the signals are fine.Someone mentioned that it might be looking for a certain frequency from Eurobird(11.482H) which I cannot recxeive here. There must be a way of over riding a default frequency like the digibox does ?
Any ideas ?
The problem I have is that on installing this receiver here in Cyprus on a 3m dish( which receives 2D very good) is I get the message that the signal is less than 50% and I should check the alignment of the dish(cheeky box !).
I cannot get rid of this message and cannot access the menu.In fact I have pressed all buttons on the remote and apart from on/off nothing happens.
I have connected a normal digibox and the signals are fine.Someone mentioned that it might be looking for a certain frequency from Eurobird(11.482H) which I cannot recxeive here. There must be a way of over riding a default frequency like the digibox does ?
Any ideas ?