hmadfai
Regular Member
- Joined
- Aug 3, 2004
- Messages
- 64
- Reaction score
- 0
- Points
- 0
- Age
- 56
- My Satellite Setup
- Strong 4820 II, 1.1 motorised, Sky, Dragon, Matrix Rel. and Joker CAMs.
- My Location
- Cardiff
Help! Dragon is not working on my Technosat 6000+ receiver. When the cam is initialized, it works for a few seconds. Then the picture gets increasingly pixilated, starts freezing and it stops decoding. Changed slots but no joy.
I downgraded to 2.20 - same problem.
I can see the Pred. menu in the CI and the Smart Card menu has Decoding OK.
I suspect that this is due to Auto Upgrade (AU) as I had problems with MR before I switched these off. I cannot find the option to turn AU off in Dragon.
Any help would be appreciated.
Thanks.
I downgraded to 2.20 - same problem.
I can see the Pred. menu in the CI and the Smart Card menu has Decoding OK.
I suspect that this is due to Auto Upgrade (AU) as I had problems with MR before I switched these off. I cannot find the option to turn AU off in Dragon.
Any help would be appreciated.
Thanks.