Help Jtag Nec Upd22120

[tasman_shn]

Anyone can help me?

I have MAGIX 9100CI+ with NEC UPD61120 (EMMA2L), I am JTAG this STB using EJFlasher 1.0b8 and boot-DSR8005CI-Premium-Normal.bin
Complette successfully & now I can use Golden Interstar DSR8005CI-Premium software to My MAGIX 9100CI+.
I Tray again with boot-DSR7800PR-31Mar2006.bin (NEC UPD61115 Boot Files) boot upload successful but my STB DEAD

I can't upload any soft to my STB, when I try to JTAG again with boot-DSR8005CI-Premium-Normal.bin EJFlasher 1.0b8 Report like This.
[0] => Detecting device/flash
[0] ByteBlaster cable detected
[0] Hardware chip detected: UPD61120 (EMMA2L)
[0] Target device initialized
[0] Cannot detect flash memory
[0] <= Finished

Report with debug mode
[0] => Detecting device/flash
[2] Detecting ByteBlaster cable: Port=378, TCK=0, TMS=1, TDI=6, TDO=7
[0] ByteBlaster cable detected
[2] JtagDriver::InitDevice: CPU_CONFIG_ADDRESS(10000000) = 2021
[0] Hardware chip detected: UPD61120 (EMMA2L)
[2] Pin=18,Mask=12010d0c,Select=12010d18,Data=12010d00
[0] Target device initialized
[2] FlashMemory::Create: Attempting to detect flash memory through CFI
[2] CFI: QUERY_ID = QRY (expected QRY)
[2] CFI: VENDOR_ID = 3
[2] FlashMemory::Create: CFI reports Intel-compatible flash
[2] FlashMemory::Create: starting vendor-specific queries
[2] IntelFlashMemory:etect: ManufacturerId=137, DeviceId=194
[0] Cannot detect flash memory
[0] <= Finished

Please help me how to reset my Flash

My STB using Intel TE28F160

 

[wolfietoyou]

Were you able to get this fixed? and if so how did you do it.