Help - New fta setup

W

whalley77

Member
My Satellite Setup
Labgear HD Satellite Kit

Laptop Windows vista
My Location
Bedfordshire
I am completely new to this satellite thing, so I need some help.

I have bought a Labgear HDSR300 Kit, on installation I find that I have hundreds of channels I don't want and very few of the ones I do want. I cannot find BBC 3 & 4, yet I have every version of BBC1 that is going. I have no channels 5 or indeed hardly any of the channels I get on my freeview set.

The Signal strength is 83% and quality is 75% what am I doing wrong?


Whalley77
 
Well first of all welcome to the Forum and well done getting the Dish aligned to the correct Satellite.

As for Channels, I assume you just scanned a pre-stored list?

If so, you need to find an option called Blind (or Auto) Scan. Possibly Network scan (which doesn't quite to the same thing) and apply that. But I'm not familiar with that Receiver, so it may not have that feature.

If these scanning features aren't available, what you need to do is look at _http://www.flysat.com/28east.php and then add/edit the listed Transponders to the table in your Receiver.


You can delete, move, rename any Channels you do find, so can end up with a tailored list.
 
BBC 3 & 4 dont start until 7pm so scan after then ;)

The free channels on satellite and freeview are different - so you wont get Dave, Virgin 1 etc - they are pay channels only on satellite.
 
Yes, thanks for the reply, but I have done the auto scan thing. I tried it on "all satellites & on the Astra one but I am still missing most of the channels and I am getting ear ache from the better half for wasting more money.
 
Analoguesat said:
BBC 3 & 4 dont start until 7pm so scan after then ;)
.
Click to expand...


Good point - they are CBeebies and CBBC by day.
 
whalley77 said:
Yes, thanks for the reply, but I have done the auto scan thing. I tried it on "all satellites & on the Astra one but I am still missing most of the channels and I am getting ear ache from the better half for wasting more money.
Click to expand...

Which channels are you missing that you were hoping for?
 
BBC 3 & 4 dont start until 7pm so scan after then

The free channels on satellite and freeview are different - so you wont get Dave, Virgin 1 etc - they are pay channels only on satellite.
Click to expand...

Ok, so it looks like she is right then a complete waste of time and money. How about if I bought a Freesat recorder would I get all of them then?
 
No - you will only get the pay channels if you buy into Sky

Freesat is just a subset of all the the free channels which have paid to be in the Freesat epg
 
No, you've not wasted your money at all.

But don't scan all Satellites as that will simply confuse the issue as you will get different subsets of the Channels you actually want (For reasons we'll explain once SWMBO is happy!).

Have you skewed the LNB?

ie , When looking from the LNB towards the dish, slacken the LNB collar and gently rotate it a few degrees clockwise. This will help you get optimum reception on both Horizontally and Vertically polarised Channels.

If you've got it at zero skew, then that might explain the absence of some Channels.


Finally, if the LNB is marked Icecrypt or FSUKVN, let us know, as these have a strange skew datum.
 
whalley77 said:
BBC 3 & 4 dont start until 7pm so scan after then

The free channels on satellite and freeview are different - so you wont get Dave, Virgin 1 etc - they are pay channels only on satellite.

Ok, so it looks like she is right then a complete waste of time and money. How about if I bought a Freesat recorder would I get all of them then?
Click to expand...

No. They are Pay Channels. All a Freesat box does is give you the Free Satellite Channels in a noddy EPG format.

Stick with the Labgear for a while.
 
Channel 5 shouldn't be a problem, available on 10.773h :)

See if you can scan FTA only, that will not list pay per view. You may have to factory reset the box.
 
Analoguesat said:
Which channels are you missing that you were hoping for?
Click to expand...


To be honest, I don't really know, it's all a bit overwhelming at first and the fact that I have got so many versions of BBC 1 kind of threw me. God alone knows how the better half will cope, it took years to teach her how to use the Humax PVR.

I just wanted to be able to use it in the caravan because I find it is getting more and more difficult to get a normal terestial signal.
 
The BBC 1's are easy to deal with - you just delete the ones you dont want - or make a couple of favourites list with just the desired channels in it :)
 
Tivù said:
If he's getting H's ....... !
Click to expand...

Maybe O/P could take a shot of the LNB up close so we can see.

whalley77 ?
 
whalley77 said:
To be honest, I don't really know, it's all a bit overwhelming at first and the fact that I have got so many versions of BBC 1 kind of threw me. God alone knows how the better half will cope, it took years to teach her how to use the Humax PVR.

I just wanted to be able to use it in the caravan because I find it is getting more and more difficult to get a normal terestial signal.
Click to expand...

Yes, but you can delete all the unwanted guff, then put what's left in any order you want. Just end up with a cut down list even SWMBO can cope with!
 
Tivù said:
No, you've not wasted your money at all.

But don't scan all Satellites as that will simply confuse the issue as you will get different subsets of the Channels you actually want (For reasons we'll explain once SWMBO is happy!).

Have you skewed the LNB?

ie , When looking from the LNB towards the dish, slacken the LNB collar and gently rotate it a few degrees clockwise. This will help you get optimum reception on both Horizontally and Vertically polarised Channels.

If you've got it at zero skew, then that might explain the absence of some Channels.


Finally, if the LNB is marked Icecrypt or FSUKVN, let us know, as these have a strange skew datum.
Click to expand...


I have set the skew to -13 or there abouts, that what it said in the instructions, althought i have played with it to get the strongest signal.

Whalley
 
As you can see, there's a lot of friendly help available - give it time and we'll sort you out:)
 
whalley77 said:
I have set the skew to -13 or there abouts, that what it said in the instructions, althought i have played with it to get the strongest signal.

Whalley
Click to expand...

As posted in #15, can you take a close up shot of the LNB and post it. You may have one of those where zero is not centred, also mentioned in post #9.
 
Tivù said:
Yes, but you can delete all the unwanted guff, then put what's left in any order you want. Just end up with a cut down list even SWMBO can cope with!
Click to expand...



I have already started on this p[rocess, but I think I will be at it for some time, as I take one step forward and then do something stupid like forgetting to save the changes and then loosing them when I try to alter the order.
I suppose it's just a matter of time and a case of expexting to much.

How do I pay to see the channels I want, such as Virgin & Dave.


Whalley77
 
Back
Top