I moved house a few weeks ago and took down my dish, motor, and pole (on t&k brackets)
Used an existing sky dish to start with but my Openbox S9 did'nt like it (no vertical switching)
Put the pole up then put the dish on the pole until I had time to do the motor, everything fine on 28.2e.
Saturday I decided to put the motor (Stab HH90) up and then the problems started, the pole is on a south facing wall so no problem finding south (for Thor) set the dish at the recommended elevation, set the motor at the correct latitude, easy enough using an android app! and nothing, did the usual adjusting (up, down, left, right) nothing, took the motor off, put the dish back for 28.2e and put the motor in-line, switched on and fine!!!, drives ok off the pole, signal from the lnb fine when not on the pole! drives when on the pole but no lnb signal!!
I'm confused, the motor is blocking the signal when on the pole but not when laid on the floor inside the house.
I said it's confusing
Any pointers gratefully accepted
Used an existing sky dish to start with but my Openbox S9 did'nt like it (no vertical switching)
Put the pole up then put the dish on the pole until I had time to do the motor, everything fine on 28.2e.
Saturday I decided to put the motor (Stab HH90) up and then the problems started, the pole is on a south facing wall so no problem finding south (for Thor) set the dish at the recommended elevation, set the motor at the correct latitude, easy enough using an android app! and nothing, did the usual adjusting (up, down, left, right) nothing, took the motor off, put the dish back for 28.2e and put the motor in-line, switched on and fine!!!, drives ok off the pole, signal from the lnb fine when not on the pole! drives when on the pole but no lnb signal!!
I'm confused, the motor is blocking the signal when on the pole but not when laid on the floor inside the house.
I said it's confusing
Any pointers gratefully accepted