Hispasat D (lower freqs) but not C

J

jrn896

Member
Joined
Jul 27, 2005
Messages
2
Reaction score
0
Points
0
Age
49
My Satellite Setup
Dish: T90 Wave Frontier
Receiver: Samsung DSR-9500
My Location
Heidelberg, Germany
Hi All,
I'm using a T90 Wave frontier dish and samsung DSR-9500 and trying to get Hispasat C/D. For some reason, I can only get the channels on the lower frquency transponders (below 11731). I've tried adjusting dish and LNB skew to no avail. Any ideas ?
Thanx
-Jim
 
Llew

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,233
Reaction score
4,202
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
In 'LNB setting' (or similar for your receiver), make sure your LNB is set for 'universal' or 9750 (low band) and 10600 (high band) for the satellite you require, if it has to be set up for individual satellites (some do). That's if you have a universal LNB.

Otherwise set up LO frequencies for whatever LNB you are using.

Llew
 
J

jrn896

Member
Joined
Jul 27, 2005
Messages
2
Reaction score
0
Points
0
Age
49
My Satellite Setup
Dish: T90 Wave Frontier
Receiver: Samsung DSR-9500
My Location
Heidelberg, Germany
Llew,
Your right! On my receiver, the 22 kHz tone setting for my universal LNB was "off." I changed it to "Auto" and I can get the higher freq transponders now.
Thanks,
Jim
 
Top