How to enter keys on Dragon?

C

CIELO CHIARO

Member
My Satellite Setup
Fortec
My Location
Great Britain
Anybody know how to enter the keys for Rai Africa on a T Rex CAM 4.1.Do you need to buy a CAS 3 programmer.I also have the dragon loader card.Whats the best way to enter the Rai Africa keys?
 
RAI Africa is encrypted in Biss on 13E, and to enter biss information requires you use a software utility to enter this into the predator file before loading it onto your cam.
I have already given you a step by step guide to add Biss channels here:
http://www.satellites.co.uk/satelli...on-cam-diablo-t-rex/118003-t-rex-4-1-cam.html
For RAI Africa, according to the web,
the CAID is 2600
Decimal SID is 8501, so the Hex figure to enter is 2135
Decimal VPID is 100 so the Hex figure to enter is 0064
the only other information you require to enter is the key, if available.
 
you asked the same question 1 weeK ago and the answer is the same as then

i.e.
365
as to updateing rai africa the keys for that are in the biss section of the cam and no you carnt update keys with remote has to be done with program such as
prededit 1.4
 
Sorry boys,I must be doing something wrong.For me its trial and error at this stage.Anyhow thanks.I suppose the latest keys are for March?
 
Try this file:
_http://www.sendspace.com/file/ukzmhp
RAI International Africa is on 13E 10993 V 27500
 
Whats the best hardware to buy that is the most user friendly for programming,a CAS 3 or the USB Infinity(If I cannot get round this problem)?I have a T REX loader card and picked up a second hand Infinity USB Phoenix compatible second hand for nought,the problem is the guy lost the CD/disk.How can I install the hardware?
 
The file I posted will open RAI International Africa, irrespective of which way you programme the Cam.
Ensure that you are loading the correct predator366,dra file.
Unzip it with winzip then copy the predator366,dra file to your desktop, so that it is easier to find and load, ensure you have already deleted or moved any previous predator version.
You can download the full software for the Infinity/Phoenix programmer from their web site:
_http://www.infinityusb.com/default.asp
Click on the download link and scroll down to Infinity USB Phoenix, download complete install v1.60 from September 14 2007.
After running the software you might have to manually install the drivers Right click on My Computer and go to properties, go to hardware, device manager. Look for your Infinity, it should have a yellow exclamation mark by it. Right click on this and update drivers.
Click no on connecting to the internet, next.
Highlight Install from a list or specific location, next.
Navigate to C:\Program Files\Infinity USB\driver and next.
This is for XP for other Operating Systems it might be slightly different.
 
Back
Top