salab
Member
- Joined
- Aug 4, 2007
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Age
- 75
- My Satellite Setup
- satellite
- My Location
- kuwait
need your help
i have sat.rec.(ADT-100/PIXX 1210) micoprocessor ic:sti5518mvb-x and flash ic:te28f160c3bd70.
when i sw.on the receiver display show 88:88.i think so flash not working.when i use (jkeysmegapackv04.12.07)
error reading from ird (dcu peek). when i press ok then
device id: 0x1d405041
device:sti5518mvb-x
when open wall
id: 0 implementation: DB4836DB serial no : R000000000 box key:00 fash base add:1fc00000 lenth(hex):200000 add offset(hex):0
press resetup 3 time and leave the wall open.than I open jkeysmegapack v04.12.07.
ird model unknown
save memory region: user spacified start:7ff80000 bytes: 80000
width:16bits delta:2 offfset:0
when I press save it saving
when I pess flash program message come
keys the flash code returned are not recognized by jkeys.mfg/device code returned are FFFFFFFF/FFFFFFFF(jedec) and FFFFFFFF(flashfile). press o.k flash programming window open
IRD Model: unknown flash: user spacdified
mfg/: unknown mfg/device: FFFFFFFF/FFFFFFFF base:address: 7FF80000 size:80000
width:16bits data:2 offset :0
need you expert opinion and help
1. which jkeysmegapack support the flash te28f160c3b.
2.how to erase and program the flash.
3.how to erase all sector.
4.what is the starting sector.
Please I need your expert opinion and help.
Thanks allot.
:
i have sat.rec.(ADT-100/PIXX 1210) micoprocessor ic:sti5518mvb-x and flash ic:te28f160c3bd70.
when i sw.on the receiver display show 88:88.i think so flash not working.when i use (jkeysmegapackv04.12.07)
error reading from ird (dcu peek). when i press ok then
device id: 0x1d405041
device:sti5518mvb-x
when open wall
id: 0 implementation: DB4836DB serial no : R000000000 box key:00 fash base add:1fc00000 lenth(hex):200000 add offset(hex):0
press resetup 3 time and leave the wall open.than I open jkeysmegapack v04.12.07.
ird model unknown
save memory region: user spacified start:7ff80000 bytes: 80000
width:16bits delta:2 offfset:0
when I press save it saving
when I pess flash program message come
keys the flash code returned are not recognized by jkeys.mfg/device code returned are FFFFFFFF/FFFFFFFF(jedec) and FFFFFFFF(flashfile). press o.k flash programming window open
IRD Model: unknown flash: user spacdified
mfg/: unknown mfg/device: FFFFFFFF/FFFFFFFF base:address: 7FF80000 size:80000
width:16bits data:2 offset :0
need you expert opinion and help
1. which jkeysmegapack support the flash te28f160c3b.
2.how to erase and program the flash.
3.how to erase all sector.
4.what is the starting sector.
Please I need your expert opinion and help.
Thanks allot.
: