jeallen01
Specialist Contributor
- Joined
- Oct 12, 2003
- Messages
- 6,674
- Reaction score
- 2,630
- Points
- 113
- My Satellite Setup
- See Signature
- My Location
- Somewhere in England (possibly?)!
I'm rather mystified about why you ask, but the front panel of the pattress box is simply for accomdating 4x blank plastic clip-on modules, similar to those used for RJ45 Ethernet sockets.. Those modules have holes drilled in them for standard back-to-back F-connector couplers (with securing nuts), and with the exterior cable runs are terminated by F-connectors to the inner ends of the couplers, and the room cable runs are connected in the same manner to the outer ends of the couplers, i.e. no different to simply joining the two sets of cables with couplers without the front panel in between (but the pattress box makes a tidier and more durable configuration - and covers the hole in the wall!)Can you take a picture or two of the flyleads used and the gubbins on the pattress box cover (or a make/model number)
Anyway, the tests were done on the X-275 setup downstairs - not the Vu+ Rx in the office.