domingouk
Member
- Joined
- Dec 13, 2005
- Messages
- 19
- Reaction score
- 0
- Points
- 0
- Age
- 62
- My Satellite Setup
-
Technomate 7755 2 VIA 2 CI Digital Receiver
90cm dish + Wall Mount
Technomate DISEqC 1.2 Motor
0.3 dB Digital Universal LNB
- My Location
- LIVERPOOL
80 but the signal saty at 10 always. I have read some of the tread about installation here but things are still foggy. I have a motorise Technomate diseqc H-H motor tm-2100a with a TM-7755 receiver. But tonight I hooked the TM to the sky mini dish and it pick up over 500 channel this tells me the receiver is working oviusly, but I can't pick anything else on my own dish I live in liverpoor, Kirkby the latitude: 53.480 N and longitude: -2.882w elevation: 30m I am still a bit haze on this setting when its come into the adjustment I have set the motor+dish as per the manual but the inclination bit true me off I now believe that I minus the 7.6 declination from the dish bracket angle is this right. The book says for my location I need to set elevation angle on the motor to 37 and the dish bracket to 22.4 but if I minus the 7.2 from the dish bracket it means that the final elevation fot the disk is 14.8 which is not even mark on the bracket this can't be right, Do I set the motor elevation to my own latitude of 53 or to 37 as the table subjest? any clarification will be greatly apreciated and sorry for the spelling I Am dizlesic almost forgot how do you input the longitude minus number - as for -2.882w on the receiver as I can't see to be able to find it when I try to input my cordinace on the usals.
Thnaks
Domingo
Thnaks
Domingo