Help Required Installing TBS6903 W7 64 - Unsigned Driver problem

S

s-band

Member
My Satellite Setup
1.5m IRTE PF, Invacom SNF-031, TBS6983,
Various L, S, C, X & Ka bits. 1.2m S/X/Ku/Ka Prodelin on Az-El (being refurbished), 1.8m Precision PF with Bullseye Ku LNB or various C & X bits
My Location
Essex
This is driving be nuts. I've searched the usual places for help but can not install the v1.0.0.5 Windows drivers for a TBS6903 on a Win7 64 bit SP1 OS. The PC is firewalled from the internet but I even tried disabling that (it is on an intranet). This is a new installation of the card on the PC that can also have the TBS6983 (which works). I've tried disabling signing enforcement by several methods including
Code: 
bcdedit /set testsigning on
That even shows the watermark warning it's in test mode. All actions run as administrator.
What ever I do, I still see the device but it's disabled due to signing failure.

I swapped to a WinXP 32bit SP3 disk, on the same hardware, and it just installed and it runs fine. (after saying I don't care that drivers are not signed) So, I know that the driver is probably not corrupt.

Anyone else had this?
 
Last edited:
Many thanks, Llew, it worked. I must have been using the wrong search strings!
I still don't understand why the disabling incantations didn't work - it's my computer and I'll do what I want with it - :mad:
 
s-band said:
it's my computer and I'll do what I want with it - :mad:
Click to expand...

Ah theres the error - its Microsofts computer & you will do with what they want you to.

A very common mistake Im afraid
:D
 
Analoguesat said:
Ah theres the error - its Microsofts computer & you will do with what they want you to.

A very common mistake Im afraid
:D
Click to expand...

Unless it doesn't work; Then it's your problem
 
Back
Top