canofan
Regular Member
- Joined
- Jun 30, 2007
- Messages
- 258
- Reaction score
- 0
- Points
- 16
- Age
- 84
- My Satellite Setup
- Amiko Alien2 Dual Tuner; CM120w/Inverto quattro on7°W; Triax 2X110, LNBFs:3BEST 1 quattro 13E 1 quattro 19.2E 1 single 28.2E multiswitches for the quattros and a satrix disecq 1.0.
- My Location
- Brussels Belgium
I cannot use a motor because it makes noise and disturbs the 12 floor's residents. So I am stuck with fixed dishes and I have none pointed to 36E.
At the moment, I have a channelmaster 120 pointed to Nilesat and i get almost all the middle-east footprint. But I have problems with the Wide footprint.
On this there are both vertical and horizontals. I do not get any of the new low band frequencies.
I intend to use a feedhorn with a c120 flange to improve reception along with the cm180.
Keano uses, successfully, a 2.4M in manchester which is is further away from us.
So I suppose a CM180 would be enough.
At the moment, I have a channelmaster 120 pointed to Nilesat and i get almost all the middle-east footprint. But I have problems with the Wide footprint.
On this there are both vertical and horizontals. I do not get any of the new low band frequencies.
I intend to use a feedhorn with a c120 flange to improve reception along with the cm180.
Keano uses, successfully, a 2.4M in manchester which is is further away from us.
So I suppose a CM180 would be enough.