Jaeger 1224 restoration/modification

[Trust]

"Long nut" is often called a "Coupling nut" in the UK - available on ebay, and, I think, at Screwfix.

Thanks , I also dont now the UK name of that tool on the right side on the picture , we call it "drijver" or "doorslag" translation makes floater and breakdown of it ?

 

[Channel Hopper]

Centre punch.

 

[Trust]

I think "pendrijver / doorslag / drevel" is pin punch
centre punch has a sharp point , we call it centerpons

 

[Channel Hopper]

OK, a blunt centre punch then.

Or perhaps a roll pin punch

 

[ozumo]

Could also be called a drift or drift pin.

 

[Manikm909]

At that piece of M6 rod you can screw a M6 long nut to pull out that spigot which is secured with a M5 screw at the opposit end .
Hammer it out from the other side after putting some tension with that spigot puller .

View attachment 130933View attachment 130934

View attachment 130932

@moonbase

Jaeger 1224 restoration/modification

Hi Rimant, Any updates? I saw an interesting thread here (in Russian) where someone also reenforced their 1224 motor. Quite simple - even something I could do! Some pictures from there:

www.satellites.co.uk