Ka L.O. Freq

[Archive-8]

What l.o. Do I use so my Tbs 6925 sat card can properly scan 31.0E, the lnb is an inverto 9e (lo 21200)

I have tried scanning this in on the tbs card and nothing.

Change the lo to universal lnb and I get 2 transponders.

 

[hvdh]

In CrazyScan, LNB tab, at the left you should find "Ka-band Inverto". LOF1 then becomes 21200 MHz.

 

[Archive-8]

I have tried that and nothing comes up in crazy scan.

Try it in easy blind scan and I get 2 other freqs. (Data)

And not the 2 transponders I was expecting.

 

[hvdh]

Although I have no Ka LNB, tried it with Ku-band and some calculation, and seems to work correct here.
For example ARD transponder 11836 gives IF of 11836 - 10600 = 1236 MHz.
With LO of 21200 MHz, I should find this transponder on 21200 - 1236 = 19964 MHz, and indeed there are the ARD programs.

(ignore the very bad dB value, caused by dropping ice chunks misaligning the dish!)

 

[Llew]

Which muxes can't you receive Chris? The Avantis are still there (my LO is off true with my Hughes LNB, so frequency of that carrier will be out on my scan).

 

[Archive-8]

Trying to scan in the avanti mux on 31.0E on my tbs6925 card.

Without setting the scan to universal for the lo.

 

[Archive-8]

This is with the L.O. Set to 21200

 

[drusattv]

Although I have no Ka LNB, tried it with Ku-band and some calculation, and seems to work correct here.
For example ARD transponder 11836 gives IF of 11836 - 10600 = 1236 MHz.
With LO of 21200 MHz, I should find this transponder on 21200 - 1236 = 19964 MHz, and indeed there are the ARD programs.

(ignore the very bad dB value, caused by dropping ice chunks misaligning the dish!)

can you change L.O FOR KU BAND LNB!!??
for this frequency:
21553 H
DVB-S2/8PSK
MPEG-4
9600 5/6
Eutelsat 7A/7B @ 7° East
==================
regards