Advice Needed L shaped wall brackets

You'd need to be more specific: There are loads of different L brackets and some will be sturdier than others.
 
I wouldn't personally go for one, having had a bad experience with one on my first motorised setup. But as it's a fixed dish you might find it's ok. Better to go for T&K brackets and a suitable diameter pole. Does the Visiosat go on a standard diameter pole or a larger one that a Wave Frontier uses?
 
I personally dislike them but there are good ones, especially ones with supporting legs (these are usually with 76mm diameter pole). They are also trickier to get vertical than T&K brackets.
 
Should I leave that up to the installer then?

I think this dish can take between 40 to 60mm poles.
 
My last one was on T&Ks with a 2" scaffold pole. They need a plumb mast to be set up easily and L type brackets are notoriously bad for that.
 
I had my own motorised dish on an L shaped bracket for more than 2 years and never had an issue , i also put one up for someone about 5 years ago and the same .. no issues . I would go for T&k's but sometimes the location , shape of the wall , dictates the brackets you use .
 
Also, the Big Bisat is a very heavy dish.:)
 
My T90 is on a 60mm L-bracket. It wouldn't have any trouble supporting a 10kg dish like the Bisat.

60mm-wall-bracket.webp
 
Here is a picture of my standard 50mm L-bracket that I use for most of my fixed installs. My guess is it could support that dish pretty easily.

IMAG0496.webp
 
I have something similar to Huevos above in the shed with two little support arms I would highly recommend, I got it with a 1mtr orbital dish that was sat in a exposed area through the gales we had here in the uk 2 yrs ago, I will post a picture up tomorrow :)
 
Huevos said:
Here is a picture of my standard 50mm L-bracket that I use for most of my fixed installs. My guess is it could support that dish pretty easily.

View attachment 73664
Click to expand...

Did you have to include your installation vehicle in the photo as well??
 
Not keen on that mount at all. If just one fixing fails the dish will come completely loose.
 
Back
Top