Lock but can't scan

Lexzie

Lexzie

Member
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
This happens often, I have a signal and a lock...
dreamDroid_1736961723361.jpg
But no stations found..
dreamDroid_1736961743682.jpg

Does anybody know why?
 
Last edited by a moderator:
I get it that will be a solution, but what I don't get that it looks like when starting to scan the tuner doesn't wait for enough signal but to soon stops and says no stations found.
When doing it from the signal finder, you can wait to have a stable signal and then press OK. Why doesn't the scan starts immediately, as I see it, but starts again tuning the frequency and waits for a lock?
I have had this with different brands of tuners, so I guess it is something in the software?
 
Well I had more luck today with fluctuating 3.2-3.5 dB:

scan.webp
 
Lexzie said:
This happens often, I have a signal and a lock...
But no stations found..
Does anybody know why?
Click to expand...
Although a temporary (unstable) LOCK can be created, the contents of PAT and SDT PIDs can be so degraded that enigma cannot read their contents.
 
26°East here in location Vienna (weather cloudy and not good conditions) and my antenna is a T90 and not so good aligned - but 6,5dB Al Magribia this is not so strong here.

1737312150611.webp
 
26°East here in Vienna - I only have a think +40channels or so but all not o strong.
1737312419091.webp
 
Yes, there are 11 channels in total. Below is a screenshot of three of them:

They added two more channels since my last screenshot.

EBSpro_TBS5927USBDVB-S2Tuner_13.0E_AWE.webp EBSpro_TBS5927USBDVB-S2Tuner_13.0E_WildTV.webp EBSpro_TBS5927USBDVB-S2Tuner_13.0E_OutdoorChannel.webp
 
Back
Top