Matrix revolutions problem

vladvas

Member
Joined
Jan 25, 2005
Messages
8
Reaction score
0
Points
0
Age
46
Hello everybody !!
i'm new here and a have some very strange problem.
i have matriw revolutions module and i have programs him to 2.19 version with cas 2 interface,BUT THE PROBLEM THAT HE DON4T SHOW ME ANY CHANNEL,the module was recongnized in receiver but not working,how can i resolve this problem
thanks to everybody

Vlad
 

ENANOS

Member
Joined
Dec 23, 2004
Messages
4
Reaction score
0
Points
0
Age
49
Maybe you have to open the receiver (after you program the module) in a FTA chanel.
 

stevo

Regular Member
Joined
Apr 2, 2004
Messages
203
Reaction score
0
Points
16
Age
54
My Satellite Setup
dreamboxhd 800 pvr
2 x dreambox 500s
globalstar-m6 free to air
1 metre dish
80cm dish
60 cm dish
all via diqsec switch.
My Location
england
vladvas said:
Hello everybody !!
i'm new here and a have some very strange problem.
i have matriw revolutions module and i have programs him to 2.19 version with cas 2 interface,BUT THE PROBLEM THAT HE DON4T SHOW ME ANY CHANNEL,the module was recongnized in receiver but not working,how can i resolve this problem
thanks to everybody

Vlad
try proggraming again but erase flash twice and try programing thouth wizard,works for me

stevo
 

daveenty

Irregular Member
Joined
Nov 11, 2004
Messages
99
Reaction score
3
Points
8
Age
69
My Satellite Setup
Plaza ST550
Dragon 4.1,
Cas2 + Add on.
Mastera card progger.
Lots of Ice Scrapers :-)
My Location
North West UK
*vladvas
Try as ENANOS says. Remove cam, switch to FTA channel. Switch receiver off. Put cam in slot, switch on receiver and let it initialise. Then try it again and all should be well. Unless you're trying Prima Fila which is now lost........T*S, M*ltivision and C*bo all clearing here on 2.19, along with a few S*y channels (though not as many as we had)
If not, then do what stevo says and reprogramme it with a couple of erases firstly.
When cam is in, go into menu and *set default key* helps as well.
 

vladvas

Member
Joined
Jan 25, 2005
Messages
8
Reaction score
0
Points
0
Age
46
thanks for all yours help,i'll try this evening.
any idees,why my magic reloaded module stop and restart every 15 minutes.
i'm using humax PVR 9700 WITH HD.
thanks
 
Top