Matrix revolutions problem

V

vladvas

Member
Hello everybody !!
i'm new here and a have some very strange problem.
i have matriw revolutions module and i have programs him to 2.19 version with cas 2 interface,BUT THE PROBLEM THAT HE DON4T SHOW ME ANY CHANNEL,the module was recongnized in receiver but not working,how can i resolve this problem
thanks to everybody

Vlad
 
vladvas said:
Hello everybody !!
i'm new here and a have some very strange problem.
i have matriw revolutions module and i have programs him to 2.19 version with cas 2 interface,BUT THE PROBLEM THAT HE DON4T SHOW ME ANY CHANNEL,the module was recongnized in receiver but not working,how can i resolve this problem
thanks to everybody

Vlad
Click to expand...
try proggraming again but erase flash twice and try programing thouth wizard,works for me

stevo
 
*vladvas
Try as ENANOS says. Remove cam, switch to FTA channel. Switch receiver off. Put cam in slot, switch on receiver and let it initialise. Then try it again and all should be well. Unless you're trying Prima Fila which is now lost........T*S, M*ltivision and C*bo all clearing here on 2.19, along with a few S*y channels (though not as many as we had)
If not, then do what stevo says and reprogramme it with a couple of erases firstly.
When cam is in, go into menu and *set default key* helps as well.
 
thanks for all yours help,i'll try this evening.
any idees,why my magic reloaded module stop and restart every 15 minutes.
i'm using humax PVR 9700 WITH HD.
thanks
 
Back
Top