Monobloc Setup Help

J

JCartney

Member
I'm just about to install a monobloc to receive 19.2E and 13E and, after doing a bit of reading up online, I've totally confused myself regarding satellite positions and what goes where.

I've had my fixed dish pointed at various satellites over the years. At 1W in the days of d2mac, at Hotbird and Astra at 19.2E (which is where it's pointing now and has been for some time). Whenever I wanted to move my dish from it's position at 19.2E to either Hotbird or 1W I would stand behind the dish and move it to the right. What's confusing me is that in pictures and descriptions of monobloc setups I've been reading, it appears it's the other way round i.e. standing behind the dish, 19.2E is to the right of 13E, as in the attached picture. (credit to original picture taker).

So, can anyone help ease my confusion and tell me what I'm missing here.

Thanks,
John
 

Attachments

  • Picture011-2.webp
    Picture011-2.webp
    43.7 KB · Views: 33
Yes, as shown in the guide above, as the signal is reflected, everything is the opposite of what you would expect. :)
 
Ah, it makes sense now. I've setup the monobloc as shown, entered the details into ProgDVB and am now getting good signals from both 19.2E and 13E. Thanks to you both for the help.
 
Back
Top