firestorm
Member
- Joined
- Feb 13, 2008
- Messages
- 18
- Reaction score
- 0
- Points
- 0
- Age
- 44
- My Satellite Setup
- 1000D Prodelin 2.4M Dreambox 7025 1.2m channel master
- My Location
- LAND OF PIES
i am looking for some advice i have just got given a 1.5m dish(dont know the make as it not come yet)i want to add this to a system in my girlfriend house,which has a motor/dish already on it.I have got hold of a dreambox7020si so i want to drive the motor for 30w,5e,13e,16e,19e,28e and use the fixed dish for 7w.
Is there a switch that can swap between the two feed(the other option is to have two boot images one set to motor and one to a fixed then swapping cable over each time i switch) if so can some one recomend one.The second is because the dish is a bit small for all the H transponders on 7w i need a very good lnb\feedhorn.Which one would be best for that dish?
any advice would be most welcome
Is there a switch that can swap between the two feed(the other option is to have two boot images one set to motor and one to a fixed then swapping cable over each time i switch) if so can some one recomend one.The second is because the dish is a bit small for all the H transponders on 7w i need a very good lnb\feedhorn.Which one would be best for that dish?
any advice would be most welcome