cirio70
Member
- Joined
- Mar 13, 2022
- Messages
- 133
- Reaction score
- 248
- Points
- 43
- Age
- 53
- My Satellite Setup
- Laminas 180 - Fracarro UX-TW-LTE(PLL) - C Band - TBS6903 - Octagon SF 8008 -Zgemma H92S
- My Location
- Lombardy - Italy
Hi,
I have a SuperJack QARL 18+ used on a Laminas 180 (more info on my setup HERE ). It's powered by a MOTEK positioner.
The problem is that the motor is not accurate in stopping at the stored position. I often have to correct the position by a few pulses (from 2 to 10).
I have dismounted the motor but the gears seem fine and the movement also seems smooth.
I would have thought of slowing down the motor by lowering the voltage with resistors....
Does anyone have experience with this or any other suggestions?
Thanks for any suggestion!
I have a SuperJack QARL 18+ used on a Laminas 180 (more info on my setup HERE ). It's powered by a MOTEK positioner.
The problem is that the motor is not accurate in stopping at the stored position. I often have to correct the position by a few pulses (from 2 to 10).
I have dismounted the motor but the gears seem fine and the movement also seems smooth.
I would have thought of slowing down the motor by lowering the voltage with resistors....
Does anyone have experience with this or any other suggestions?
Thanks for any suggestion!