Reply to thread

Message: <blockquote data-quote="a33" data-source="post: 1139738" data-attributes="member: 332642">Well, an elevation angle of about 38 degree would still be correct, but if the motor scale(s) indeed only use a latitude value (as is written in that thread), you should indeed set the latitude value on the motor scale (or better: the modified latitude value, so 52.5+0.7 = 53.2 degrees).Modified dish declination offset angle would be 7.5-0.7 = 6.8 degrees, and because the bend angle of the motor shaft seems to be 35 degrees, the dish elevation scale should be set at 35-6.8 = 28.2 degrees.Greetz,A33</blockquote>