Motorised Dish Setup with Technisat 65/70cm square dish.

I could be wrong ... just an thought... maybe the elevation restriction on the technisat bracket maybe a issue... As its only designed for Astra sats.
Which receiver are you using ??
 
D4ftpunk said:
Noticed that when the motor is set to 0 on the receiver, its not exactly 0..
Click to expand...

When the GotoZero or GotoRef(erence) command of the receiver doesn't bring you to zero, you can bring the motor to exactly zero, and do a motor reset. This reset would set the present motor position as the new zero.
Some receivers support the Reset command. But I believe also SG2100 type motors have a (sunk-in) button for reset. You could try that.

greetz,
A33
 
a33 said:
But I believe also SG2100 type motors have a (sunk-in) button for reset.
Click to expand...

Not all, it seems:
www.satelliteguys.us

SG-2100 Motor Referencing

I have a Diseqc 1.2 (SG-2100) motor and am looking for info on the reference position. All the information I have tells me that it should move to the "0" position when told to go to the reference position....and I believe that it used to do just that. Now, when I reference it, it moves to...
www.satelliteguys.us www.satelliteguys.us

Greetz,
A33
 
Thanks, I'm gonna try that next time I'm up there... although today I replaced the cheap £3 LNB with an Inverto Ultra one... no signal improvement initially but a re-scan picked up more channels and some troublesome ones seem to work better.
 
Back
Top