motorised systems

P

pasha99

Member
My Satellite Setup
sky+
Bt Total Broadband
My Location
peterborough
hi all was looking for some help i am taking up the hobby of satellite tv and was wondering what would be the best system to get seen a lot about the technomate 1500 is it any good also where can i buy the whole kit from as i'm not sure what to add or not, will a 90cm dish pick up all satellites east to west
many thanks
 
Hello Pasha99 and welcome to the forum

I've moved your request to a more appropriate section. Have a look through the other threads/posts to get a feel for things. There's lots to get your teeth into.

The Technomate 1500CI + is a very good and reasonably priced receiver.
 
Hi,

Both the technomate and a 90cm dish are a very good start. The technomate 1000 series are very easy to use.

Have a look at the site sponsors sites to see if you can get it all from one place.

http://www.satellites.co.uk/index.php?page=sponsors

Have a look at Rolfs tutorial to see what mounting hardware you will need.

http://www.satellites.co.uk/satelli...6-setup-guide-moteck-diseqc-motor-others.html

there is another by longstockings.

Basically you will need:
Receiver
Dish (pole mount type)
Motor (H-H)
Good quality Satellite Cable
F-Connectors x4
Pole + T K brackets (better)
or wall bracket (not as good)
Satellite finder meter (optional, but makes things easier)
self amalgamating tape or boots
Cable clips (8mm I think)
 
i have just had a look at a technomate 1500ci+super + a triax td88 90cm motorised dish and they will fully load it for motorised use do i need a v-box? what do they do sorry i'm a bit thick but i'm learning
 
It depends on what motor you get. For a Diseqc motor a V-box is not required. The V-box is needed for the more powerful and faster 36V motors
 
Back
Top