MR for BEC66000+CI

N

newuser

Member
I just got MR with 1.081 firmware, but BEC6600+CI (version 82-68CI-v5.00)
does not recognize it.
Any idea what's wrong.

I also can't find a driver for Win 2K for Dell laptop to check the CAM.

Help is highly appreciated.
 
I also have MR with 1.081 firmware, BEC6600+CI ,but version 82-68CI-V8.00. Updated the software to the latest version.I hope this help

​
 
I don't have any messages when I load MR. It says "No module".
Should it complain that module is incorrect, or something like that.
From vendor who sold me a cam, I got info that receiver should,
at least, say UCAS 3.0

Where can I download the latest software version for BEC?

Thanks
 
:) This software version is for BEC 6800 CI ,but it also work for my BEC 6600 CI.But before upgrading the software remember to download User Data.This option will read the information you have programmed into the receiver (satellite/transponder list ) and allow you to save it to a file.Remember, you have to follow instruction carefully. I have seen people get their receiver damaged permenently by not following the upgrading procedure correctly.
Good luck,
 
Can you please help me to know from where can i make update to the software of unknown kind of reveiver called Panorama ?
 
Anyone Have Any Information About A Receiver Called Panorama Please Let Me Know , Thanks.
 
Have you tried doing a Google search click here
 
Actually the link for the BEC firmware is

http://www.chaintech.com.tw/download/DMPD/SW/DBS-68CI800_dnl.bin

Seems like someone goofed the forward slashes.
 
Hello exuse for my bad English,I am from italy.
I can't make a list of channel,I ask if someone have a ready list channel .txt for hotbird 13 est...Thank very much...bye niko
 
Back
Top