MRV + cas 3 please help

[viper7998]

Hi

I just bought a cas 3 to program my MRV cam.
I use cas interface studio 6.5
I select and install mrv2.25.
Everything looks working fine

I select a fta channel (euronews)
I switch off my db7000
put the mrv inside
Switch on and in setup mode
In common Interface module There is Reset,Init,No module.

I think I missed something, Can somebody could help.
Thanks

Franck

 

[john_graydon]

Hi

I just bought a cas 3 to program my MRV cam.
I use cas interface studio 6.5
I select and install mrv2.25.
Everything looks working fine

I select a fta channel (euronews)
I switch off my db7000
put the mrv inside
Switch on and in setup mode
In common Interface module There is Reset,Init,No module.

I think I missed something, Can somebody could help.
Thanks

Franck

Hi Franck
1st Why are you using the MRev with your dreambox ???
2nd try A free to air station 1st then go into ci then init
If it dont come up reboot the dreambox. Dont relly find a problem with the mrev in the dreambox when checking it out.

 

[viper7998]

Hi Franck
1st Why are you using the MRev with your dreambox ???
2nd try A free to air station 1st then go into ci then init
If it dont come up reboot the dreambox. Dont relly find a problem with the mrev in the dreambox when checking it out.

Hi john,

Thanks for your reply,

- I tried to use a MRV in my Db just because I received it when I bought my DB.I am not really an expert so I thought The Mrv will open more channels.
If not how it could be useful for me.

- tried again and it says no module found.
I changed the xilinx 2 days ago,this may explain the pb.

Regards

Franck