Multi LNB Holder

P

Paul.C

New Member
My Satellite Setup
Technomate receiver,80cm dish
My Location
Catford South London
Hi there
About to set up my sat dish(90cm) again after about 5-6 years not having it installed my question is I want to get one of these for 13-19 & 28 deg if it will work with these 3 sats

TM-LB1

which is the way to set these up and what sat will be the prime focus as the lnb will not be on the end of the arm to point straight at the main satellite,my location is Catford Sth London,thank you for any help on this subject
Regards
Paul.C
 
Yes no problem this is a set up that worked very well for me with a 88cm mesh dish 28.2 east + 19.2 east + 13 east the sky is reversed on the dish so 28.2 east is on your left 19.2 east is slightly off center as is 13 east this will give you the best signals on all 3 satellites.
View attachment 85316
 
Last edited:
Prime focal would be 19e. You may need to play and tweak to get best results not forgetting to skew LNB's for req satellite.
 
As you will be using a 4 way DiSEqC switch you can add a 4th Lnb for either 7 east or 5 east.
 
thanks guys
So looking at the dish from the front lnb's in order of left side 28-19(c)-13 & 5 or 7 to the right,so the dish arm will point roughly at 16deg I guess
 
Back
Top